R. Danzer, Thermal fatigue cracks in pressure die casting dies. Gie erei-Praxis, pp.288-297, 1983.

B. Miquel, Compréhension et détermination des paramètres influant sur le phénomène d'endommagement par fatigue thermique des moules en fonderie sous pression d'aluminium, Rapport interne CROMeP-EMAC, 2000.

A. Persson, On tool failure in die casting, 2003.

R. Breitler, Recent Developments in Die Steels for Pressure Die Casting. Transactions of the Driving Die Casting into the 21st Century, 1991.

S. Jacob, Propriétés des alliages d'aluminium de fonderie, M, vol.4, pp.675-676

I. Polmear, Light alloys, Metallurgy of the Light Metals 2 nd Edition, 1981.

R. Reynoldson, Die casting Tools Manufactured From H13 Hot Work Tool Steels. Die Casting and Technology, pp.39-49, 1998.

D. Schwam, J. Wallace, and S. Birceanu, Effect of Design Factors on Thermal Fatigue Cracking of Die Casting Dies, 2004.

G. Roberts and R. Cary, Tool steels, pp.21-26, 1980.

M. Siaut and A. D. , The high performance steel for light alloys die casting dies, Hommes et Fonderie, vol.3, issue.315, pp.28-34, 2001.

R. Lévèque, Traitements thermiques dans la masse des aciers à outils, pp.1134-1134, 1134.

F. Medjedoub, Détermination des paramètres influant sur le phénomène d'endommagement par fatigue thermique des moules en fonderie sous pression d'aluminium, 2004.

R. Graham and J. Wallace, Structure and Thermal Fatigue Relations for Dies Steel, in Die Casting Research Foundation, Inc. 1974, Die Casting Research Foundation of American Die Casting Institute, Thermal Processing

A. Hamasaiid, Heat transfer at the casting/die interface in high-pressure die casting-experimental results and contribution to modelling Die Thermal Fields and Heat Fluxes During Die Casting of 380 Aluminium Alloy in H-13 Steel Dies Thermal Fatigue Behavior of H-13 Die Steel for Aluminium Die Casting with Various Ion Sputtered Coatings, National Aeronautics and Space Administration. p. 50 p. 20. Herbst, N., Material Selection in Diecasting -Part 1 -Die Insert Materials. Die Casting Bulletin, Luke & Singer Pty Ltd, pp.11-29, 1981.

S. Malm and J. Tidlund, Increased Life for Die Casting Dies, Transactions of the 10th International Die Casting Congress, 1979.

F. Medjedoub, Endommagement par faïençage des moules de fonderie sous pression en fatigue thermique origines, mécanismes et approches. Fonderie, Fondeur d'aujourd'hui, pp.22-36, 2005.

F. Medjedoub, Experimental conditions and environment effects on thermal fatigue damage accumulation and life of die-casting steel X38CrMoV5 (AISI H11), International Journal of Microstructure and Materials Properties, vol.3, issue.2/3, pp.336-349, 2008.
DOI : 10.1504/IJMMP.2008.018739

URL : https://hal.archives-ouvertes.fr/hal-01685086

S. Gopal, A. Lakare, and R. Shivpuri, Soldering in Die Casting: Aluminum Alloy and Die Steel Interactions. Die Casting Engineer, pp.70-81, 2000.

S. Manson, J. Sjostrom, J. Bergstrom-gorbach, V. , V. Alekhin et al., Thermal fatigue of Die Casting Dies ? A Review and Proposed Future Program Casting Characteristics of Aluminium Die Casting Alloys. DOE/ID13716, Worcester Polytechnic Institute Thermal fatigue in hot-working tools Determining thermal fatigue of steels for die casting of aluminum alloys, Scandinavian Journal of Metallurgy Metal Science and Heat Treatment, vol.27, issue.2811, pp.221-231, 1972.

N. Ohrberg and J. Tidland, Some Aspects of Die Steels, Die Casting Bulletin, pp.21-28, 1979.

D. Mattavelli, Die casting problems and possible solutions, in Pressocolata E Technologia (Die Casting & Technology). mars, pp.42-51, 1998.

M. Maguire, Investment cast AISI H13 tooling for automotive applications. in Conference: 28. international symposium on automotive technology and automation: dedicated conference on mechatronicsefficient computer support for engineering, manufacturing, testing and reliability, pp.18-22, 1995.

F. Rezai-aria, Sollicitations thermomécaniques des outillages de forge à chaud, pp.38-40, 2002.

L. Norström, B. Klarenfjord, and E. M. Svensson, General Aspects onWashout" Mechanisms in Aluminium Die Casting Dies. Transactions of the 17th International Die Casting Congress What is Thermal Fatigue, Thermal Fatigue of Materials and Components, ASTM STP 612, pp.219-225, 1976.

L. Remy, Méthodologie de la fatique thermique Journées Internationales de Printemps sur la Fatigue à Haute Température, pp.9-11, 1986.

H. Zhu, J. Guo, and E. J. Jia, Experimental study and theoretical analysis on die soldering in aluminum die casting, Journal of Materials Processing Technology, vol.123, issue.2, pp.229-235, 2002.
DOI : 10.1016/S0924-0136(01)01174-8

B. Kosec and L. Kosec, Analysis of casting die failures, Engineering Failure Analysis, vol.8, issue.4, pp.355-359, 2001.
DOI : 10.1016/S1350-6307(00)00032-7

C. Mitterer, Application of hard coatings in aluminium die casting ??? soldering, erosion and thermal fatigue behaviour, Surface and Coatings Technology, vol.125, issue.1-3, pp.1-3, 2000.
DOI : 10.1016/S0257-8972(99)00557-5

S. Apelian, Die soldering -A metallurgical analysis of the molten aluminium/die interface reactions. Transactions of the North American Association (NADCA) congress and Exposition, 1997.

Y. Chu, A study of the cast alloy/die surface interactions in aluminium die casting. Transactions of the North American Association (NADCA) congress and Exposition, 1997.

Y. Zhu, Evaluation of soldering, washout and thermal fatigue resistance of advanced metal materials for aluminum die-casting dies, Materials Science and Engineering: A, vol.379, issue.1-2, pp.420-431, 2004.
DOI : 10.1016/j.msea.2004.03.020

A. Chacrone, Étude métallographique et cinétique de la formation de la couche d'alliage lors des revêtements d'aciers par l'aluminium et l'aluminium-silicium. Thèse de Doctorat à l Formation and progression of die soldering during high pressure die casting, Materials Science & Engineering A, vol.397, issue.12, pp.356-369, 1986.

H. Shahverdi, Microstructural analysis of interfacial reaction between molten aluminium and solid iron, Journal of Materials Processing Technology, vol.124, issue.3, pp.345-352, 2002.
DOI : 10.1016/S0924-0136(02)00225-X

V. Joshi, A. Srivastava, and E. R. Shivpuri, Intermetallic formation and its relation to interface mass loss and tribology in die casting dies, Wear, vol.256, issue.11-12, pp.11-12, 2004.
DOI : 10.1016/j.wear.2003.08.001

M. Sundqvist and R. Richards, Tribological aspects of hot work tool steels in contact with aluminium Materials Engineering Program, Cullen College of Engineering Metallurgy of continuous hot dip aluminizing, University of Houston. International Materials Reviews, vol.47, issue.5, pp.39-191, 1994.

K. Wladyslaw, A. Et, and . Fajkiel, Testing the Soldering Tendencies of Aluminium Die Casting Alloys, Journal of Heat Treatment and Materials Z. Werkst. Wärmebeh, vol.49, pp.379-387, 1991.

S. Shankar, D. Et, and . Apelian, Die soldering: Mechanism of the interface reaction between molten aluminum alloy and tool steel, Metallurgical and Materials Transactions B, vol.31, issue.5, pp.465-476, 2002.
DOI : 10.1179/imr.1994.39.5.191

G. Engberg, L. Et, and . Larsson, Elevated-Temperature Low Cycle and Thermomechanical Fatigue Properties of AISI H13 Hot-Work Tool Steel. Low Cycle Fatigue, ASTM STP 942, pp.576-587, 1988.

J. Worbye, New Information Points the Way to Longer Die Casting Die Life, Die Casting Engineer, pp.42-54, 1985.

R. P. Skelton, R. Shivpuri, and E. R. Rapp, Fatigue at high temperature Applied Science Publishers Oxydation de l'Acier à Outils X38CrMoV5 à 600 Effects of molten aluminum on H13 dies and coatings, Journal of Materials Engineering and Performance, issue.42, pp.175-181, 1983.

Z. Chen, D. Fraser, and E. M. Jahedi, Structures of intermetallic phases formed during immersion of H13 tool steel in an Al???11Si???3Cu die casting alloy melt, Materials Science and Engineering: A, vol.260, issue.1-2, pp.188-196, 1999.
DOI : 10.1016/S0921-5093(98)00963-0

Y. Chu, P. Cheng, and E. R. Shivpuri, Soldering Phenomenon in Aluminum Die Casting: Possible Causes and Cures. 17 th International Die Casting Congress and Exposition, 1993.

Q. Han, S. Et, and . Viswanathan, Analysis of the mechanism of die soldering in aluminum die casting, Metallurgical and Materials Transactions A, pp.139-146, 2003.
DOI : 10.1179/imr.1994.39.5.191

S. Denner, R. Jones, and E. R. Thomas, Hot Dip Aluminizing of Steel Strip, Iron Steel Int, vol.48, issue.3, pp.241-252, 1975.

G. Winkelman, Morphological features of interfacial intermetallics and interfacial reaction rate in Al- 11Si-2.5 Cu-(0.15/0.60) Fe cast alloy/die steel couples, Journal of Materials Science, issue.2, pp.39-519, 2004.

Z. Chen, M. Et, and . Jahedi, Die erosion and its effect on soldering formation in high pressure die casting of aluminium alloys, Materials & Design, vol.20, issue.6, pp.303-309, 1999.
DOI : 10.1016/S0261-3069(99)00035-7

S. Carrera, The Development of a Surface Engineered Coating System for Aluminum Pressure Die Casting Dies, Transactions of the North American Association (NADCA) congress and Exposition, 2001.

V. Joshi, Dissolution and soldering behavior of nitrided hot working steel with multilayer LAFAD PVD coatings, Surface and Coatings Technology, vol.146, issue.147, pp.338-343, 2001.
DOI : 10.1016/S0257-8972(01)01426-8

R. Shivpuri, V. Joshi, and E. A. Srivastava, Soldering and Ejection Behaviour of Duplex and Multilayer Filtered Arc PVD Coatings. Transactions of the North American Association (NADCA) Congress and Exposition, 2001.

D. Argo, R. Et, and . Barnhurst, The causes of soldering in zinc die casting. Transactions of the North American Association (NADCA) Congress and Exposition, 1997.

R. Shivpuri, A study of erosion in die casting dies by a multiple pin accelerated erosion test, Journal of Materials Engineering and Performance, vol.4, issue.2, pp.145-153, 1995.
DOI : 10.1007/BF02664107

M. Jahedi, D. Et, and . Fraser, Prevention of soldering in high pressure die casting dies using aluminium & iron oxide surface treatment. Transactions of the 21st International Die Casting Congress and Exposition, North American Die Casting Association (NADCA), Cincinnati, 2001. 68. Sundqvist, M. et S. Hogmark, Effects of liquid aluminium on hot-work tool steel. Tribology International Etude du comportement et de l'endommagement d'un superalliage base cobalt soumis à la fatigue thermique, Thèse de Doctorat à l, pp.129-134, 1991.

E. Glenny, A Technique for Thermal-Shock and Thermal-Fatigue Testing Based on the Use of Fluidized solids, Journal of the Institute of Metals, vol.87, pp.1958-1959

E. Glenny, The Influence of The Geometry on Thermal Fatigue Behavior. Thermal and Height Strain Fatigue, The Institute of The Iron and Steel Institute, pp.346-363, 1967.

M. A. Howes, Evaluation of Thermal Fatigue Resistance of Metals Using the Fluidized-Bed Technique. Fatigue at Elevated Temperatures, ASTM STP, vol.520, pp.242-254, 1973.

M. A. Howes, Evaluation of Thermal Fatigue Resistance of Metals Using the Fluidized-Bed Technique. Fatigue at Elevated Temperatures, ASTM STP, vol.520, pp.242-254, 1973.

M. Howes, A Study of Thermal Fatigue Mechanisms, Thermal Fatigue of Materials and Components. ASTM STP, vol.612, pp.86-105, 1976.
DOI : 10.1520/STP27886S

F. Rezai-aria, Thermal Fatigue Behavior of Mar-M 509 Superalloy, Mechanical Behavior of Materials- IV, pp.247-253, 1983.

M. Suzuki, M. Ishihara, H. Miyachi, J. , D. Moracz et al., Residual Stress and Heat Checking in Die Casting Dies. Transactions of the North American Association (NADCA) Congress and Exposition Chicago, Thermal Fatigue Behavior of Die Materials for Aluminum Die Casting. Transactions of the 6th SDCE International Die Casting Congress, pp.1-20, 1970.

D. Klobar, J. Tuöek, and B. Taljat, Thermal fatigue of materials for die-casting tooling, Materials Science and Engineering: A, vol.472, issue.1-2, pp.198-207, 2008.
DOI : 10.1016/j.msea.2007.03.025

Y. Sun, Fatigue behavior and fractography of laser-processed hot work tool steel, Vacuum, vol.73, issue.3-4, pp.3-4, 2004.
DOI : 10.1016/j.vacuum.2003.12.161

R. Ebner, Thermal fatigue behaviour of hot-work tool steels: heat check nucleation and growth, International Journal of Microstructure and Materials Properties, vol.3, issue.2/3, pp.182-194, 2008.
DOI : 10.1504/IJMMP.2008.018726

S. Malm, M. Svensson, and E. J. Tidlund, Heat Checking in Hot Work Steels, Bull. Cercle Etud. Met, vol.14, issue.5, pp.339-75, 1979.

D. Rousseau, fatigue thermique des aciers ?? outils pour travail ?? chaud, ème Colloque International sur les Aciers à Outils pour Travail à Chaud, St-Etienne Improvement Service Life for mpm H13 Mandrels in Mechanical Working and Steel Processing Conference 85. Starling, C. et J. Branco, Thermal fatigue of hot-work tool steel with hard coatings. Thin Solid Films, pp.436-442, 1977.
DOI : 10.1051/metal/197572120875

S. Jean, Méthodologie d'exploitation mécanique et microstructurale d'un essai de fatigue thermique: application de l'étude de faïençage d'un acier pour outils de forge à chaud, Thèse de Doctorat à l'Institut National Polytechnique de Toulouse, 1999.

V. Velay, Modélisation du comportement cyclique et de la durée de vie d'aciers à outils martensitiques, Thèse de Doctorat, 2003.

J. Wallace, Y. Wang, and E. S. Schwam, Effect of Composition and Processing on the Thermal Fatigue And Toughness of High Performance Die Steel. Die Casting Eengineer, pp.26-33, 1997.

D. Schwam, J. F. Et, and . Wallace, Improvement of Die Life in Aluminium Die Casting. Die Casting Engineer, pp.12-16, 1995.

V. Ivanov, I. Paine, and E. P. Revnyuk, Study of thermal fatigue of H 13 die steel with various surface treatments, High-Temperature Materials and Processes, pp.65-78, 2002.

D. 'ans, P. S. , and H. A. Williams, Contribution à la Mise au Point d'une Démarche Rationnelle de Sélection des Traitements de Surface, Illustrée dans le Cas des Dispositifs de Fonderie de l'Aluminium. Thèse Doctorat à l The thermal fatigue of die casting dies. The Fourth National Die Casting Exposition & Congress, 1966.

A. Dias and H. Et-lieurade, La fatigue thermique: mécanismes, simulation et modélisation, Science et Industrie, issue.428, pp.3-19, 1988.

F. Meyer-olbersleben, C. Engler-pinto-jr, F. Rezai-aria, S. Et-inoue, and T. , On thermal fatigue of nickel-based superalloys. Thermomechanical Fatigue Behavior of Materials: Second Volume, Thermal fatique under Multiaxial Thermal stresses. Proceedings of the international conference, pp.66-80, 1969.

G. Tret-'yachenko, Method of testing materials for thermal fatigue with a speified biaxial stress state, Strength of Materials, pp.361-366, 1996.

N. Haddar, A. Fissolo, and E. V. Maillot, Thermal fatigue crack networks: an computational study, International Journal of Solids and Structures, vol.42, issue.2, pp.771-788, 2005.
DOI : 10.1016/j.ijsolstr.2004.06.033

F. Junyi, B. Mengxin, and E. D. Zijou, Thermal fatigue under multiaxial stresses. Fatigue & Fracture of Engineering Materials & Structures, pp.525-534, 1990.
DOI : 10.1111/j.1460-2695.1990.tb00622.x

URL : http://www.gruppofrattura.it/ocs/index.php/ICMFF/ICBMFF3/paper/download/11730/11200

A. Srivastava, V. Joshi, and E. R. Shivpuri, Computer modeling and prediction of thermal fatigue cracking in die-casting tooling, Wear, vol.256, issue.1-2, pp.38-43, 2004.
DOI : 10.1016/S0043-1648(03)00281-3

F. Turquier, Residual stress measurements in a tool steel coated with plasma-sprayed zirconia and submitted to thermal fatigue in liquid aluminium, Physica B: Condensed Matter, vol.276, issue.278, pp.872-873, 1989.
DOI : 10.1016/S0921-4526(99)01637-3

S. Esmaeili, Interaction between oxidation and thermo-mechanical fatigue in IN738LC superalloy ??? I, Scripta Metallurgica et Materialia, vol.32, issue.11
DOI : 10.1016/0956-716X(95)00004-F

K. Snowden, The effect of atmosphere on the fatigue of lead (Air pressure dependence of the fatigue life of polycrystalline lead, revealing the effects of oxygen and of surface condition and coatings) Acta Metallurgica, pp.295-303, 1964.

R. Wei, G. Et, and . Simmons, Recent progress in understanding environment assisted fatigue crack growth, International Journal of Fracture, vol.101, issue.3, pp.235-247, 1981.
DOI : 10.1007/BF00053522

D. Williams, A new criterion for failure of materials by environment-induced cracking, International Journal of Fracture, vol.9, issue.1, pp.63-74, 1973.

M. Achter, Effect of environment on fatigue cracks. Paper from Fatigue Crack Propagation, ASTM STP No, vol.415, pp.181-204, 1967.

H. Driver, Influence of temperature and environment on the fatigue mechanisms of single-crystal and polycrystal 316L. Low Cycle Fatigue, pp.438-455, 1988.

P. Marshall, The influence of environment on fatigue and creep/fatigue Journées Internationales de Printemps sur la Fatigue à Haute Température, 1986.

J. Petit, Influence de l'Environnement sur la Tenue en Fatigue des Métaux et Alliages Métalliques Colloque National MECAMAT-Aussois, 2007.

J. Petit and G. Henaff, Sarrazin-Baudoux, Fissuration par fatigue et environnement atmosphérique Mechanisms of liquid metal induced embrittlement, Journal de Physique International Materials Reviews, vol.4, issue.1046, pp.42-251, 1997.

P. Hairy, M. Et, and . Richard, Réduction du collage en fonderie sous pression par l'utilisation de traitements de surface. Fonderie, Fondeur d'aujourd'hui, 1996.

N. Tsujii, Effect of testing atmosphere on low-cycle fatigue of hot-work tool steel at elevated temperature, ISIJ international, issue.7, pp.35-920, 1995.

S. Malm, L. Et, and . Norström, Material-related model for thermal fatigue applied to tool steels in hot-work applications, Metal Science, pp.544-550, 1979.

H. Policella and P. Lesne, Crack initiation and propagation in thermal fatigue -Predictive modeling(Amorçage et propagation de fissures en fatigue thermique -Calculs de prévision). aux Journées Internationales de Printemps sur la Fatigue à Haute Température, 1986.

H. Burlet, Crack growth behaviour in a thermal fatigue test. Experiments and calculations. Fatigue & Fracture of Engineering Materials & Structures, pp.123-133, 1989.

G. Tret-'yachenko and V. Barylo, Solov'eva, Thermal fatigue crack propagation in massive cylinders during their cyclic heating, Strength of Materials, pp.380-388, 1999.

A. Persson, S. Hogmark, and E. J. Bergstrôm, Simulation and evaluation of thermal fatigue cracking of hot work tool steels, International Journal of Fatigue, vol.26, issue.10, pp.26-1095, 2004.
DOI : 10.1016/j.ijfatigue.2004.03.005

H. Lieurade, Experimental simulation and theoretical modelling of crack initiation and propagation due to thermal cycling, High Temperature Technology, vol.8, issue.2, pp.137-145, 1989.
DOI : 10.1080/02619180.1990.11753468

A. Oudin, Thermo-mechanical fatigue of hot-work tool steels Thèse de Doctorat à l'École des Mines des Paris 121. Daffos, C., Endommagement des outillages de forgeage traités par nitruration: Etude et Modélisation Comportement et tenue en fatigue isotherme d'aciers à outils Z38CDV5 autour de la transition oligocyclique-endurance, Thèse de Doctorat à l'Institut National des Sciences Appliquées de Toulouse, 1998.

F. Rezai-aria, L. Et, and . Remy, An oxidation fatigue interaction damage model for thermal fatigue crack growth, Engineering Fracture Mechanics, vol.34, issue.2, pp.283-294, 1989.
DOI : 10.1016/0013-7944(89)90143-4

D. Rooke, F. Baratta, and E. D. Cartwright, Simple methods of determining stress intensity factors, Engineering Fracture Mechanics, vol.14, issue.2, pp.397-426, 1981.
DOI : 10.1016/0013-7944(81)90010-2

D. Broek, The practical use of fracture mechanics 522 p. 126. Parks, D., A stiffness derivative finite-element technique for determination of crack tip stress intensity factors, International Journal of Fracture, vol.10, issue.4, pp.487-502, 1974.

G. Sih and P. Bethlehem, Handbook of stress-intensity factors: Stress-intensity factor solutions and formulas for reference 815 p, 1973. 128, Étude des mécanismes de fatigue thermique et modélisation du phénomène dans le cas de matériaux pour cylindres de laminoirs à chaud, 1973.

F. Rezaï-aria, Fatigue thermique et fatigue isotherme d'un superalliage à base de cobalt: étude métallurgique de l'endommagement et modélisation Thèse de Doctorat à l'Université de Paris-Sud, Centre d'Orsay. 131 Thermal fatigue characterization of cast cobalt and nickel-base superalloys, pp.416-426, 1973.

H. Bueckner, Field singularities and related integral representations. Mechanics of Fracture, pp.239-314, 1973.
DOI : 10.1007/978-94-017-2260-5_5

J. Bergström, F. Et, and . Rezaï-aria, High temperature fatigue of tool steels, Proceedings of 7th International Tooling Conference on Tooling Materials and Their Applications from Research to Market 134. Bocquet, G. et Rézai-Aria, F. Étude de performances de deux nuances d'aciers X38CrMoV5 sous conditions de fonctionnement industrielles, 2005.

S. Jean, Méthodologie d'exploitation mécanique et microstructurale d'un essai de fatigue thermique: application de l'étude de faïençage d'un acier pour outils de forge à chaud, Thèse Doctorat à l'Institut National Polytechnique de Toulouse, 1999.

A. Oudin, Thermo-mechanical fatigue of hot-work tool steels, Thèse Doctorat à l'Ecole des Mines de Paris, 2001.

N. Mebarki, Relation Microstructures ? Propriétés Mécaniques d'Aciers Martensitiques Revenus Destinés aux Outillages de Mise en Forme d'Alliages Légers, Thèse Doctorat à l'Ecole des Mines de Paris, 2001.

P. Bruckel, Oxydation de l'Acier à Outils X38CrMoV5 à 600-700°C et en, 2003.

C. Daffos, Endommagement des outillages de forgeage traités par nitruration : étude et modélisation, Thèse Doctorat à l'Institut National des Sciences Appliquées de Toulouse, 2004.

F. Medjedoub, Détermination des paramètres influant sur le phénomène d'endommagement par fatigue thermique des moules en fonderie sous pression d'aluminium, Thèse Doctorat à l'Ecole des Mines de Paris, 2004.

V. Velay, Modélisation du comportement cyclique et de la durée de vie d'aciers à outils martensitiques, Thèse Doctorat à l'Ecole des Mines de Paris, 2003.

O. Barrau and P. Michaud, Influence des Éléments d'Alliages sur la Relation entre les Précipitations et les Propriétés Mécaniques Usuelles d'Acier à Outils à 5 % de Chrome, Thèse Doctorat à l'Institut National Polytechnique de Toulouse Thèse Doctorat à l'Ecole des Mines de Paris Proceedings of the 5th International Conference on Tooling. 1999. 12. Bringas, J. et M. Wayman, CASTI metals red book: nonferrous metals, 2003.

S. Jacob and J. R. Davis, Propriétés des alliages d'aluminium de fonderie Aluminium and aluminium alloys. ASM Specialty handbook Microstructure and mechanical properties of AC AlSi9CuX alloys, Ingénieur. M Journal of Achievements in Materials and Manufacturing Engineering, vol.4, issue.142, pp.675-676, 2007.

L. Backerud, G. Chai, E. J. Samuel, F. , A. Samuel et al., Foundry Alloys American Foundrymen's Society, Inc, Solidification Characteristics of Aluminum Alloys. AFS Trans, vol.2, issue.104, pp.266-283, 1990.

M. Sundqvist, Tribological aspects of hot-work tool steels in contact with aluminium, Materials Engineering Program, 1994.

A. A. Chacrone, Etude métallographique et cinétique de la formation de la couche d'alliage lors des revêtements d'aciers par l'aluminium et l'aluminium-silicium. Thèse Doctorat à l Kinetic interactions between solid iron and molten aluminium, Materials Science & Engineering A, vol.363, issue.12, pp.53-61, 1986.

S. Denner, R. Jones, and E. R. Thomas, Hot Dip Aluminizing of Steel Strip, Iron Steel Int, vol.48, issue.3, pp.241-252, 1975.

E. Glenny, T. Et, and . Taylor, A Study of the Thermal-Fatigue Behavior of Metals: The Effect of Test Conditions on Nickel-Base High-Temperature Alloys, Journal of the Institute of Metals, pp.449-461, 1959.

L. Roux and S. , Initiation au traitement d'images. Cours, Ecole des Mines d'Albi-Carmaux, p.161, 2005.

S. Shankar, D. Et, and . Apelian, Die soldering: Mechanism of the interface reaction between molten aluminum alloy and tool steel, Metallurgical and Materials Transactions B, vol.31, issue.5, pp.465-476, 2002.
DOI : 10.1179/imr.1994.39.5.191

Z. Chen, D. Fraser, and E. M. Jahedi, Structures of intermetallic phases formed during immersion of H13 tool steel in an Al???11Si???3Cu die casting alloy melt, Materials Science and Engineering: A, vol.260, issue.1-2, pp.188-196, 1999.
DOI : 10.1016/S0921-5093(98)00963-0

G. Winkelman, Morphological features of interfacial intermetallics and interfacial reaction rate in Al- 11Si-2.5 Cu-(0.15/0.60) Fe cast alloy/die steel couples, Journal of Materials Science, issue.2, pp.39-519, 2004.

M. Sundqvist, Tribological aspects of hot-work tool steels in contact with aluminium, Materials Engineering Program, 1994.

A. Bouayad, Etude expérimentale et modélisation numérique des mécanismes physico-chimiques et des comportements thermomécaniques au niveau de l'interface alliage coulé/insert métallique, Thèse Doctorat à l'Ecole Nationale Supérieure d'Arts et Métiers, 2003.

M. Yan, Z. Et, and . Fan, The erosion of H21 tool steel in molten A380 alloy, Journal of Materials Science, vol.35, issue.7, pp.1661-1667, 2000.
DOI : 10.1023/A:1004799713069

A. Molinari, Corrosion behaviour of a surface-treated AISI H11 hot work tool steel in molten aluminium alloy, Surface and Coatings Technology, vol.126, issue.1, pp.31-38, 2000.
DOI : 10.1016/S0257-8972(00)00530-2

D. Fraser, M. Jahedi, and E. Z. Chen, The Mechanism of Soldering in High Pressure Die Casting of Aluminium Alloy

A. Chacrone, Etude métallographique et cinétique de la formation de la couche d'alliage lors des revêtements d'aciers par l'aluminium et l'aluminium-silicium, p.10, 1986.

S. Kobayashi, T. Et, and . Yakou, Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment, Materials Science and Engineering: A, vol.338, issue.1-2, pp.44-53, 2002.
DOI : 10.1016/S0921-5093(02)00053-9

H. Shahverdi, Microstructural analysis of interfacial reaction between molten aluminium and solid iron, Journal of Materials Processing Technology, vol.124, issue.3, pp.345-352, 2002.
DOI : 10.1016/S0924-0136(02)00225-X

A. Oudin, Thermo-mechanical fatigue of hot-work tool steels, Thèse de Doctorat à l'École des Mines des Paris, 2001.

N. Mebarki, Relation Microstructures ? Propriétés Mécaniques d'Aciers Martensitiques Revenus Destinés aux Outillages de Mise en Forme d'Alliages Légers, Thèse de Doctorat à l'École des Mines des Paris, p.14, 2001.

N. Tsujii, Effect of Testing Atmosphere on Low Cycle Fatigue of Hot Work Tool Steel at Elevated Temperature., ISIJ International, vol.35, issue.7, pp.920-926, 1995.
DOI : 10.2355/isijinternational.35.920

P. Michaud, Influence des Élements d'Alliages sur la Relation entre les Précipitations et les Propriétés Mécaniques Usuelles d'Aciers à Outils à 5 % de Chrome Comportement et tenue en fatigue isotherme d'aciers à outils Z38CDV5 autour de la transition oligocyclique-endurance, 1998.

S. Pontevichi, Chimie d'interface du couple fer 5% Si): aspects théoriques et appliqués, J. Phys. IV France, vol.13, issue.122, pp.75-80, 2004.
DOI : 10.1051/jp4:2004122011

URL : http://jp4.journaldephysique.org/10.1051/jp4:2004122011/pdf

T. Maitra, S. Et, and . Gupta, Intermetallic compound formation in Fe???Al???Si ternary system: Part II, Materials Characterization, vol.49, issue.4, pp.293-311, 2002.
DOI : 10.1016/S1044-5803(03)00005-6

R. Richards, Metallurgy of continuous hot dip aluminizing, International Materials Reviews, vol.29, issue.5, pp.191-212, 1994.
DOI : 10.1108/eb006787

C. Mitterer, Application of hard coatings in aluminium die casting ??? soldering, erosion and thermal fatigue behaviour, Surface and Coatings Technology, vol.125, issue.1-3, pp.1-3, 2000.
DOI : 10.1016/S0257-8972(99)00557-5

S. Gopal, A. Lakare, and E. R. Shivpuri, Evaluation of thin film coatings for erosive???corrosive wear prevention in die casting dies, Surface Engineering, vol.15, issue.4, pp.297-300, 1999.
DOI : 10.1016/0257-8972(91)90199-7

E. Lugscheider, Corrosion tests of PVD coatings with die lubricant used for Al high-pressure die-casting dies. Surface & coatings technology, pp.1-3, 1998.

S. Gopal, A. Lakare, and E. R. Shivpuri, Soldering in Die Casting: Aluminum Alloy and Die Steel Interactions. Die Casting Engineer, pp.70-81, 2000.

H. Zhu, J. Guo, and E. J. Jia, Experimental study and theoretical analysis on die soldering in aluminum die casting, Journal of Materials Processing Technology, vol.123, issue.2, pp.229-235, 2002.
DOI : 10.1016/S0924-0136(01)01174-8

M. V. Schütze, Protective oxide scales and their breakdown Interaction of 18Cr-10Ni stainless steel with liquid aluminium, Journal of Materials Science, issue.8, pp.25-3615, 1990.

S. Denner and R. Jones, Kinetic Interactions Between AluminumLiquid and Iron/SteelSolid for Conditions Applicable to Hot Dip Aluminizing, Met. Technol, issue.43, pp.167-174, 1977.
DOI : 10.1179/030716977803292574

M. Yu, R. Shivpuri, R. Rapp, and J. , Effects of molten aluminum on H13 dies and coatings, Diffusion et transport de matière dans les solides. Les Éditions de Physique, pp.175-181, 1985.
DOI : 10.1007/BF02664111

V. Joshi, A. Srivastava, and E. R. Shivpuri, Intermetallic formation and its relation to interface mass loss and tribology in die casting dies, Wear, vol.256, issue.11-12, pp.11-12, 2004.
DOI : 10.1016/j.wear.2003.08.001

V. Yeremenko, Y. Natanzon, and E. V. Dybkov, The effect of dissolution on the growth of the Fe 2 Al 5 interlayer in the solid iron-liquid aluminium system, Journal of Materials Science, issue.7, pp.16-1748, 1981.

V. Dybkov, Reaction diffusion in heterogeneous binary systems, Journal of Materials Science, vol.16, issue.9, pp.3078-3084, 1986.
DOI : 10.1007/978-3-642-52680-0

V. Dybkov, Reaction diffusion in heterogeneous binary systems, Journal of Materials Science, vol.14, issue.9, pp.3085-3090, 1986.
DOI : 10.1007/978-3-642-52680-0

A. Bouayad, Kinetic interactions between solid iron and molten aluminium, Materials Science and Engineering: A, vol.363, issue.1-2, pp.53-61, 2003.
DOI : 10.1016/S0921-5093(03)00469-6

F. Medjedoub, Détermination des paramètres influant sur le phénomène d'endommagement par fatigue thermique des moules en fonderie sous pression d'aluminium, 2004.

C. Daffos, Endommagement des outillages de forgeage traités par nitruration : étude et modélisation, Thèse de Doctorat à l'Institut National des Sciences Appliquées de Toulouse, 2004.

M. Schütze, Protective oxide scales and their breakdown, 1997.

M. Sundqvist, Tribological aspects of hot-work tool steels in contact with aluminium, Materials Engineering Program, 1994.

A. Oudin, Thermo-mechanical fatigue of hot-work tool steels, Thèse de Doctorat à l'École des Mines des Paris, 2001.

P. Bruckel, Oxydation de l'Acier à Outils X38CrMoV5 à 600-700°C et en, 2003.

S. Jean, Méthodologie d'exploitation mécanique et microstructurale d'un essai de fatigue thermique: application de l'étude de faïençage d'un acier pour outils de forge à chaud, Thèse de Doctorat à l'Institut National Polytechnique de Toulouse, 1999.

C. Vernault, Interaction couches d'oxyde et résistance à la fatigue de l'acier inoxydable 316L, Thèse de Doctorat à l'École Nationale, 1998.

O. C. Barrau, J. Et, and . Mendez, Étude du frottement et de l'usure d'acier 'outils pour travail à chaud Influence des couches d'oxyde sur l'endommagement par fatigue d'un acier inoxydable de type 316 L, Thèse de Doctorat à l'Institut National des Sciences Appliquées de Toulouse Annales de Chimie et Sciences des Matériaux, Lavoisier, pp.351-362, 1999.

Z. Azari, M. Lebienvenu, G. Pluvinage-neu, R. , H. Sehitoglu-neu et al., Influence de l'oxydation sur la tenue en fatigue oligocyclique de l'acier 30CD4 Journées Internationales de Printemps sur la Fatigue a Haute Température, Thermomechanical Fatigue, Oxidation, and Creep: Part II. Life Prediction. Metallurgical and Materials Transactions A Thermomechanical Fatigue, Oxidation, and Creep: Part I. Damage Mechanisms. Metallurgical and Materials Transactions A, pp.1769-1783, 1986.

F. Pérez, Effect of thermal cycling on the high temperature oxidation resistance of austenitic AISI 309S stainless steel, Materials and Corrosion, vol.33, issue.121, pp.231-238, 2002.
DOI : 10.1007/BF00666805

M. Reger, L. Et, and . Remy, Influence de l'Oxydation sur le Comportement en Fatigue à Haute Température d'un Superalliage à Base de Nickel, L'IN 100, Journées Internationales de Printemps sur la Fatigue à Haute Température, 1986.

E. Pinto and C. , Étude de l'Endommagement en Fatigue Thermo-Mécanique de

N. Tsujii, Effect of Testing Atmosphere on Low Cycle Fatigue of Hot Work Tool Steel at Elevated Temperature., ISIJ International, vol.35, issue.7, pp.920-926, 1995.
DOI : 10.2355/isijinternational.35.920

G. Moulin, Propriétés Mécaniques des Couches d'Oxyde. MS06-Oxydation et Corrosion à Haute Température : Mécanismes, Étude de Cas et Prévention, Centre d'Actualisation des Connaissances et de l'Étude des Matériaux Industriels (CACEMI)-Conservatoire National des Arts et Métiers (CNAM)

H. Evans, Stress effects in high-temperature oxidation of metals. International materials reviews, pp.1-40, 1995.

G. Béranger, C. Et, and . Coddet, Oxydation des Métaux à Haute Température : Rôle des Contraintes Internes, J. Microsc. Spectrosc. Electron, issue.5, pp.793-814, 1980.

J. Benedyk, D. Moracz, and E. J. Wallace, Thermal Fatigue Behavior of Die Materials for Aluminum Die Casting. Transactions of the 6th SDCE International Die Casting Congress, pp.1-20, 1970.

F. Junyi, B. Mengxin, and E. D. Zijou, Thermal fatigue under multiaxial stresses. Fatigue & Fracture of Engineering Materials & Structures, pp.525-534, 1990.
DOI : 10.1111/j.1460-2695.1990.tb00622.x

URL : http://www.gruppofrattura.it/ocs/index.php/ICMFF/ICBMFF3/paper/download/11730/11200

D. Delagnes, Comportement et tenue en fatigue isotherme de l'acier à outils Z38CDV5 autour de la transition oligocyclique-endurance, 1998.

N. Mebarki, Relation Microstructures ? Propriétés Mécaniques d'Aciers Martensitiques Revenus Destinés aux Outillages de Mise en Forme d'Alliages Légers, 1926.

J. Petit and G. Henaff, Sarrazin-Baudoux, Fissuration par fatigue et environnement atmosphérique, Journal de Physique, vol.4, issue.104, pp.203-212, 2000.
DOI : 10.1051/jp4:2000428

H. Policella, P. Et, and . Lesne, Crack initiation and propagation in thermal fatigue-Predictive modeling (Amorcage et propagation de fissures en fatigue thermique -Calculs de prévision), Société Française de Métallurgie, Journées Internationales de Printemps sur la Fatigue à Haute Température, pp.9-11, 1986.

F. Rezaï-aria, Fatigue thermique et fatigue isotherme d'un superalliage à base de cobalt: étude métallurgique de l'endommagement et modélisation, Thèse de doctorat, 1986.

A. Persson, S. Hogmark, and J. Bergström, Thermal fatigue cracking of surface engineered hot work tool steels, Surface and Coatings Technology, vol.191, issue.2-3, pp.216-227, 2005.
DOI : 10.1016/j.surfcoat.2004.04.053

J. Orteu, An Innovative Method for 3-D Shape, Strain and Temperature Full-Field Measurement Using a Single Type of Camera: Principle and Preliminary Results, Experimental Mechanics, vol.36, issue.1, pp.163-179, 2008.
DOI : 10.1007/s11340-007-9071-7

URL : https://hal.archives-ouvertes.fr/hal-01170373

P. Lamesle, Monitoring distorsions of metallic parts during quenching, 5th International conference and european conference on heat treatment, 2007.

M. G. Ozisik, Heat transfer: a basic approach Normalized thermal stresses analysis to design a thermal fatigue experiment, Journal of Thermal Stresses, vol.28, issue.1, pp.1-16, 1985.

F. Medjedoub, Détermination des paramètres influant sur le phénomène d'endommagement par fatigue thermique des moules en fonderie sous pression d'aluminium, 2004.

O. Barrau, Etude du frottement et de l'usure d'acier à outils de travail à chaud, Thèse Doctorat à l'Institut National Polytechnique de Toulouse, 2004.

V. Velay, Modélisation du comportement cyclique et de la durée de vie d'aciers à outils martensitiques, Thèse Doctorat à l'École des Mines de Paris, 2003.

J. Lemaitre, J. Chaboche-ahmer, and Z. , Mécanique des Matériaux Solides Cyclic behaviour simulation of X38CRMOV5-47HRC (AISI H11)-tempered martensitic hotwork tool steel, International Journal of Microstructure and Materials Properties, vol.12, issue.32, pp.326-335, 1985.

Z. Zhang, S. Malm, L. Nortströn-mowbray, D. , D. Woodford et al., Thèse Doctorat à l'École des Mines d'Albi Material-related model for thermal fatigue applied to tool steels in hot-work applications. Metal Science, 1979: p. 544ñ550. 15. Delagnes, D., Comportement et tenue en fatigue isotherme d'aciers à outils Z38CDV5 autour de la transition oligocyclique-endurance. Thèse Doctorat à l'École des Mines de Paris, 1998. 16. Oudin, A., Thermo-mechanical fatigue of hot-work tool steels 17. Daffos, C., Endommagement des outillages de forgeage traités par nitruration : étude et modélisation Thermal fatigue characterization of cast cobalt and nickel-base superalloys. Fatigue at elevated temperatures Handbook of stress-intensity factors: Stress-intensity factor solutions and formulas for reference, Modélisation du comportement cyclique anisotherme d'un acier martensitique 55NiCrMoV7 avec prise en compte du vieillissement Thèse de Doctorat à l'École des Mines de Paris Thèse de Doctorat à Institut National des Sciences Appliquées de Toulouse, pp.1973-1992, 1973.

D. Rooke, F. Baratta, and D. Cartwright, Simple methods of determining stress intensity factors, Engineering Fracture Mechanics, vol.14, issue.2, pp.397-426, 1981.
DOI : 10.1016/0013-7944(81)90010-2

D. Broek and A. Dias, The practical use of fracture mechanics Kluwer Academic, 1988. 22 Etude des mécanismes de fatigue thermique et modélisation du phénomène dans le cas de matériaux pour cylindres de laminoirs à chaud Thèse de Doctorat à l'Université de Pais-Sud, Centre d'Orsay, 1985. 23. Tret'yachenko, G., V. Barylo, and N. Solov'eva, Thermal fatigue crack propagation in massive cylinders during their cyclic heating, Strength of Materials, pp.31-380, 1999.

H. Burlet, Crack growth behaviour in a thermal fatigue test. Experiments and calculations. Fatigue & Fracture of Engineering Materials & Structures, pp.123-133, 1989.

H. M. Bueckner, Field singularities and related integral representations Mechanics of fracture Suresh, S., Fatigue of materials An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens, pp.239-314, 1973.

F. Baratta, Stress intensity factors for internal multiple cracks in thick-walled cylinders stressed by internal pressure using load relief factors, Engineering Fracture Mechanics, vol.10, issue.4, pp.691-697, 1978.
DOI : 10.1016/0013-7944(78)90027-9

N. Louat, A theoretical evaluation of crack closure, Metallurgical and Materials Transactions A, pp.2225-2232, 1993.
DOI : 10.1016/0956-716X(93)90538-4

J. Petit, Influence de l'Environnement sur la Tenue en Fatigue des Métaux et Alliages Métalliques. in Colloque National MECAMAT-Aussois, 2007.

. Fspall, Fonderie Sous Pression d'Aluminium. FTT: Fatigue Thermique

S. Kobayashi and T. Et-yakou, Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment, Materials Science and Engineering: A, vol.338, issue.1-2, pp.338-382, 2002.
DOI : 10.1016/S0921-5093(02)00053-9

F. Bosselet, Affinement exp??rimental de l'isotherme Al-Fe-Si ?? 1000 K, Journal de Physique IV (Proceedings), vol.122, pp.41-46, 2004.
DOI : 10.1051/jp4:2004122050

URL : http://jp4.journaldephysique.org/10.1051/jp4:2004122050/pdf

T. Maitra, S. Et, and . Gupta, Intermetallic compound formation in Fe???Al???Si ternary system: Part II, Materials Characterization, vol.49, issue.4, pp.293-311, 2002.
DOI : 10.1016/S1044-5803(03)00005-6

D. Andrews, Références bibliographiques 1 The Protection on Iron and Steel by Aluminium Coatings, B3, vol.4, pp.153-158, 1960.

J. Nicholls, The Production and Properties of Aluminium Coatings. Product Finishing, pp.15-61, 1962.

J. Nicholls, Zinc and aluminium diffusion coatings. METALLURGIA, Rebruary, pp.75-57, 1967.

J. Sprowl, Production and uses of aluminized steel. Iron and Steel Engineer, pp.38-96, 1961.

P. Stroup and G. Purdy, Aluminum Coating of SteelóA Comparison of Various Processes, p.59, 1950.

L. Zhao, Deposition of aluminium alloy Al 12 Si by cold spraying, Advanced engineering materials, vol.8, issue.4, 2006.

I. Lakhtine, Traitement Thermo-Chimique de l'Acier, Métallographie et Traitements thermiques des, p.259

B. Gaillard-allemand, Passivation of Nickel-Based Superalloy Inconel 690 by Pack-Cementation Chromium Coating, Materials Science Forum, vol.369, pp.735-742, 2001.

A. Weronski, T. Hejwowski-rohr, and V. , Thermal fatigue of metals 366 p. 10 Développement de Revêtements pour les Aciers d'Echangeurs Thermiques et Amélioration de leur Résistance à la Corrosion en Environnement Simulant les Fumées de Combustion de Charbon, Thèse Doctorat à l'Institut National Polytechnique de Toulouse. 2005. 11. Xiang, Z. et P. Datta, Kinetics of low-temperature pack aluminide coating formation on alloy steels. Metallurgical and Materials Transactions A, pp.37-3359, 1991.

H. Shahverdi, Microstructural analysis of interfacial reaction between molten aluminium and solid iron, Journal of Materials Processing Technology, vol.124, issue.3, pp.345-352, 2002.
DOI : 10.1016/S0924-0136(02)00225-X

F. Zamoum, Nouveaux Matériaux à base de Niobium et de Molybdène pour Turbines Aéronautiques : - Relations de Phases et Oxydation -Elaboration de Nouveau Revêtements, Thèse Doctorat à l, 2008.