M. Adamiak, A. Czupry?ski, A. Kopy??, Z. Monica, M. Olender et al., The properties of arc-sprayed aluminum coatings on armor-grade steel, Metals, vol.8, issue.2, pp.142-150, 2018.

M. Afzal, F. Ahmed, A. N. Khan, M. Y. Anwar, and L. Ali, Physical chemistry of WC-12% Co coatings deposited by thermal spraying at different standoff distances, International Journal of Materials Research, vol.106, issue.9, pp.988-995, 2015.

V. E. Arkhipov, A. F. Londarsky, G. V. Moskvitin, and P. Ms, The structure and properties of the coating based on particles of copper and zinc deposited by gas-dynamic spraying, IOP Conference Series: Materials Science and Engineering, vol.489, p.12011, 2019.

A. Mf and D. Jones, Engineering materials 1: An introduction to properties, applications and design, vol.1, 2012.

S. F. Bonabi, F. Ashrafizadeh, A. Sanati, and N. Sm, Structure and corrosion behavior of arc-sprayed Zn-Al coatings on ductile iron substrate, Journal of Thermal Spray Technology, vol.27, issue.3, pp.524-537, 2018.

V. Boronenkov and Y. Korobov, Fundamentals of arc spraying: Physical and chemical regularities, 2016.

G. F. Cavallaro, A. Francavilla, M. Latour, V. Piluso, and G. Rizzano, Experimental behaviour of innovative thermal spray coating materials for FREEDAM joints, Composites Part B: Engineering, vol.115, pp.289-299, 2017.

T. C. Chen, C. C. Chou, T. Y. Yung, K. C. Tsai, and J. Y. Huang, Wear behavior of thermally sprayed Zn/15Al, Al and Inconel 625 coatings on carbon steel, Surface and Coatings Technology, vol.303, pp.78-85, 2016.

Y. H. Chen, G. W. Wu, and J. L. He, Antimicrobial brass coatings prepared on poly (ethylene terephthalate) textile by high power impulse magnetron sputtering, Materials Science and Engineering: C, vol.48, p.25579894, 2015.

Y. X. Chen, X. B. Liang, Y. Liu, S. C. Wei, and B. S. Xu, Effect of heat treatment on microstructure and residual stress of wire arc sprayed high carbon steel coating, Surface Engineering, vol.26, issue.6, pp.407-412, 2010.

G. Darut, H. Liao, C. Coddet, J. M. Bordes, and M. Diaby, Steel coating application for engine block bores by plasma transferred wire arc spraying process, Surface and Coatings Technology, vol.268, pp.115-122, 2015.

D. Fantozzi, V. Matikainen, M. Uusitalo, H. Koivuluoto, and V. , Chlorine-induced high temperature corrosion of Inconel 625 sprayed coatings deposited with different thermal spray techniques, Surface and Coatings Technology, vol.318, pp.233-243, 2017.

,

P. Fauchais, Current status and future directions of thermal spray coatings and techniques, future development of thermal spray coatings, 2015.

J. A. Gan and C. C. Berndt, Thermal spray forming of titanium and its alloys, Titanium powder metallurgy: Science, technology and applications, pp.425-446, 2015.

I. Gedzevi?ius and A. V. Valiulis, Influence of the particles velocity on the arc spraying coating adhesion, Materials Science, vol.9, pp.334-337, 2003.

I. S. Georgescu, C. Genes, C. Costache, E. R. Baciu, C. Baciu et al., Considerations regarding sandblasting metal surfaces designed for electric arc spraying, Key Engineering Materials, vol.660, pp.57-61, 2015.

,

. Hvozdets'kyi, . V?, Y. Y. Sirak, K. R. Zadorozhna, and D. Y?, Influence of the size of drops and the velocity of flow on the structure and properties of electric-arc coatings, Materials Science, vol.53, issue.5, pp.702-708, 2018.

A. L. Johnston, A. C. Hall, and J. F. Mccloskey, Effect of process inputs on coating properties in the twin-wire arc zinc process, Journal of Thermal Spray Technology, vol.22, issue.6, pp.856-863, 2013.

A. S. Kang, J. S. Grewal, and C. Gs, Effect of thermal spray coatings on wear behavior of high tensile steel applicable for tiller blades, Materials Today: Proceedings, vol.4, pp.95-103, 2017.

D. Kumar and K. N. Pandey, Optimization of the process parameters in generic thermal barrier coatings using the Taguchi method and grey relational analysis, Journal of Materials: Design and Applications, vol.231, issue.7, pp.600-610, 2017.

D. Kumar, Q. Murtaza, and R. C. Singh, Sliding wear behavior of aluminum alloy coating prepared by two-wire electric arc spray process, The International Journal of Advanced Manufacturing Technology, vol.85, issue.1-4, pp.237-252, 2016.

W. Y. Li and C. J. Li, Optimal design of a novel cold spray gun nozzle at a limited space, Journal of Thermal Spray Technology, vol.14, issue.3, pp.391-396, 2005.

R. S. Lima, A. Kucuk, C. C. Berndt, J. Karthikeyan, C. M. Kay et al., Deposition efficiency, mechanical properties and coating roughness in cold-sprayed titanium, Journal of Materials Science Letters, vol.21, issue.21, pp.1687-1689, 2002.

N. B. Maledi, O. P. Oladijo, I. Botef, T. P. Ntsoane, A. Madiseng et al., Influence of cold spray parameters on the microstructures and residual stress of Zn coatings sprayed on mild steel, Surface and Coatings Technology, vol.318, pp.106-113, 2017.

P. Martin, Introduction to surface engineering and functionally engineered materials, vol.74, 2011.

M. M. Matz and M. Aumiller, Practical comparison of cylindrical nozzle and de Laval nozzle for wire arc spraying, Journal of Thermal Spray Technology, vol.23, issue.8, pp.1470-1477, 2014.

G. Mauer, D. Sebold, R. Vaßen, E. Hejrani, D. Naumenko et al., Impact of processing conditions and feedstock characteristics on thermally sprayed MCrAlY bondcoat properties, Surface and Coatings Technology, vol.318, pp.114-121, 2017.

N. Priyantha, P. Jayaweera, A. Sanjurjo, K. Lau, F. Lu et al., Corrosion-resistant metallic coatings for applications in highly aggressive environments, Surface and Coatings Technology, vol.163, pp.31-36, 2003.

M. R. Rokni, S. R. Nutt, C. A. Widener, V. K. Champagne, and R. H. Hrabe, Review of relationship between particle deformation, coating microstructure, and properties in high-pressure cold spray, Journal of Thermal Spray Technology, vol.26, issue.6, pp.1308-1355, 2017.

S. Salavati, T. W. Coyle, and J. Mostaghimi, Twin wire arc spray process modification for production of porous metallic coatings, Surface and Coatings Technology, vol.286, pp.16-24, 2016.

O. Sharifahmadian, H. R. Salimijazi, M. H. Fathi, J. Mostaghimi, and L. Pershin, Study of the antibacterial behavior of wire arc sprayed copper coatings, Journal of Thermal Spray Technology, vol.22, issue.2-3, pp.371-379, 2013.

S. Siegmann and C. Abert, 100 years of thermal spray: About the inventor Max Ulrich Schoop, Surface and Coatings Technology, vol.220, pp.3-13, 2013.

R. Singh, K. H. Rauwald, E. Wessel, G. Mauer, S. Schruefer et al., Effects of substrate roughness and sprayangle on deposition behavior of cold-sprayed Inconel 718, Surface and Coatings Technology, vol.319, pp.249-259, 2017.

J. Tharajak, T. Palathai, and N. Sombatsompop, The effects of magnetic field-enhanced thermal spraying on the friction and wear characteristics of poly (ether-ether-ketone) coatings, Wear, vol.372, pp.68-75, 2017.

S. Theimer, M. Graunitz, M. Schulze, F. Gaertner, and T. Klassen, Optimization adhesion in cold spraying onto hard substrates: A case study for brass coatings, Journal of Thermal Spray Technology, vol.28, issue.1-2, pp.124-134, 2019.

W. Tillmann, E. Vogli, and M. Abdulgader, Asymmetric melting behavior in twin wire arc spraying with cored wires, Journal of Thermal Spray Technology, vol.17, issue.5-6, pp.974-982, 2008.

B. F. Toma, I. Ionita, D. A. Gheorghiu, L. Eva, C. Bejinariu et al., Influence of process parameters and geometry of the spraying nozzle on the properties of titanium deposits obtained in wire arc spraying, Advanced Materials Research, vol.1111, pp.211-216, 2015.

,

S. L. Toma, C. Bejinariu, R. Baciu, and S. Radu, The effect of frontal nozzle geometry and gas pressure on the steel coating properties obtained by wire arc spraying, Surface and Coatings Technology, vol.220, pp.266-270, 2013.

S. L. Toma, C. Bejinariu, D. A. Gheorghiu, and C. Baciu, The improvement of the physical and mechanical properties of steel deposits obtained by thermal spraying in electric arc, Advanced Materials Research, vol.814, pp.173-179, 2013.

,

J. Wilden, J. P. Bergmann, S. Jahn, S. Knapp, F. Van-rodijnen et al., Investigation about the chrome steel wire arc spray process and the resulting coating properties, Journal of Thermal Spray Technology, vol.16, issue.5-6, pp.759-767, 2007.

J. Wilden, A. Schwenk, J. P. Bergmann, S. Zimmermann, and K. Landes, Supersonic nozzles for the wire arc spraying, the International Thermal Spray Conference, pp.1068-1073, 2005.

J. Zhou, M. Yang, R. Wang, and X. Pang, Annealing behavior of aluminum coating prepared by arc spraying on P355NL1 steel, Surface and Coatings Technology, vol.330, pp.53-60, 2017.