J. Takadoum, Materials and surface engineering in tribology, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00340321

A. Committee, Friction, lubrication, and wear technology, Materials Park, 1992.

S. Barril, S. Mischler, and D. Landolt, Electrochemical effects on the fretting corrosion behaviour of Ti6Al4V in 0.9% sodium chloride solution, Wear, vol.259, pp.282-291, 2005.

T. M. Manhabosco, S. M. Tamborim, and C. B. Santos, electrochemical and tribo-electrochemical characterization of bare and nitrided Ti6Al4V in simulated body fluid solution, Corros Sci, vol.53, pp.1786-1793, 2011.

N. Diomidis, S. Mischler, and N. More, Tribo-electrochemical characterization of metallic biomaterials for total joint replacement, Acta Biomater, vol.8, pp.852-859, 2012.

J. Ding, W. S. Sum, and R. Sabesan, Fretting fatigue predictions in a complex coupling, Int J Fatigue, vol.29, pp.1229-1244, 2007.

D. Wei, S. Yuan, and W. , Failure analysis of dovetail assemblies under fretting load, Eng Fail Anal, vol.26, pp.381-396, 2012.

G. Pj and A. F. Grandt, Fracture mechanics based fretting fatigue life predictions in Ti-6Al-4V

, Eng Fract Mech, vol.71, pp.2229-2243, 2004.

M. Ullah, C. S. Wu, and F. Qayyum, Prediction of crack tip plasticity induced due to variation in solidification rate of weld pool and its effect on fatigue crack propagation rate (FCPR), J Mech Sci Technol, vol.32, pp.3625-3635, 2018.

D. Wei, Y. Wang, and Y. , Analysis of failure behaviors of dovetail assemblies due to high gradient stress under contact loading, Eng Fail Anal, vol.18, pp.314-324, 2011.

I. Barsoum, F. Khan, and Z. Barsoum, Analysis of the torsional strength of hardened splined shafts, Mater Des, vol.54, pp.130-136, 2014.

R. Swati, L. Wen, and H. Elahi, Extended finite element method (XFEM) analysis of fiber reinforced composites for prediction of micro-crack propagation and delaminations in progressive damage: a review, Microsyst Technol, vol.25, pp.747-763, 2019.

V. Memmolo, H. Elahi, and M. Eugeni, Experimental and numerical investigation of PZT response in composite structures with variable degradation levels, J Mater Eng Perform, vol.28, pp.3239-3246, 2019.

F. Qayyum, S. Guk, and S. Pru¨ger, Investigating the local deformation and transformation behavior of sintered X3CrMnNi16-7-6 TRIP steel using a calibrated crystal plasticity-based numerical simulation model, Int J Mater Res, vol.111, pp.392-404, 2020.

F. Mukhtar, F. Qayyum, and H. Elahi, Studying the effect of thermal fatigue on multiple cracks propagating in an SS316L thin flange on a shaft specimen using a multi-physics numerical simulation model, Strojniski Vestnik J Mech Eng, vol.65, pp.565-573, 2019.

C. E. Marino, E. M. De-oliveira, and R. C. Rocha-filho, On the stability of thin-anodic-oxide films of titanium in acid phosphoric media, Corros Sci, vol.43, pp.1465-1476, 2001.

V. Totolin, . Pejakovi-c-v, and T. Csanyi, Surface engineering of Ti6Al4V surfaces for enhanced tribocorrosion performance in artificial seawater, Mater Des, vol.104, pp.10-18, 2016.

S. Barril, N. Debaud, and S. Mischler, A triboelectrochemical apparatus for in vitro investigation of fretting-corrosion of metallic implant materials, Wear, vol.252, pp.744-754, 2002.

C. D. Lykins, S. Mall, and V. K. Jain, Combined experimental-numerical investigation of fretting fatigue crack initiation, Int J Fatigue, vol.23, pp.703-711, 2001.

J. Teng and K. Sato, In situ observations of fretting wear behavior in PMMA/steel model, Mater Des, vol.25, pp.471-478, 2004.

P. J. Golden, Development of a dovetail fretting fatigue fixture for turbine engine materials, Int J Fatigue, vol.31, pp.620-628, 2009.

A. Kumar, S. , G. Sundara-raman, S. , S. Narayanan et al., prediction of fretting wear behavior of surface mechanical attrition treated Ti-6Al-4V using artificial neural network, Mater Des, vol.49, pp.992-999, 2013.

T. Venkatesh, B. Conner, and S. Suresh, An experimental investigation of fretting fatigue in Ti-6Al-4V: the role of contact conditions and microstructure, Metall Mater Trans A, vol.32, pp.1131-1146, 2001.

L. Benea, E. Danaila, and P. Ponthiaux, Effect of titania anodic formation and hydroxyapatite electrodeposition on electrochemical behaviour of Ti-6Al-4V alloy under fretting conditions for biomedical applications, Corros Sci, vol.91, pp.262-271, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01237386

T. Chapman, R. Chater, and E. Saunders, Environmentally assisted fatigue crack nucleation in Ti-6Al-2Sn-4Zr-6Mo, Corros Sci, vol.96, pp.87-101, 2015.

J. Chen, Q. Zhang, and Q. Li, Corrosion and tribocorrosion behaviors of AISI 316 stainless steel and Ti6Al4V alloys in artificial seawater, Trans Nonferrous Met Soc China, vol.24, pp.1022-1031, 2014.

M. Aziz-kerrzo, K. G. Conroy, and A. M. Fenelon, Electrochemical studies on the stability and corrosion resistance of titanium-based implant materials, Biomaterials, vol.22, pp.1531-1539, 2001.

Z. Anjum, F. Qayyum, and S. Khushnood, prediction of non-propagating fretting fatigue cracks in Ti6Al4V sheet tested under pin-in-dovetail configuration: experimentation and numerical simulation, Mater Des, vol.87, pp.750-758, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01609223

E. J. Hearn, Mechanics of materials 2: The mechanics of elastic and plastic deformation of solids and structural materials, 1997.

Y. Mutoh and J. Xu, Fracture mechanics approach to fretting fatigue and problems to be solved, Tribol Int, vol.36, pp.99-107, 2003.

F. Mukhtar, F. Qayyum, and Z. Anjum, effect of chrome plating and varying hardness on the fretting fatigue life of AISI D2 components, Wear, vol.418, pp.215-225, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01949926

H. Jiang, Y. Cong, and X. Zhang, Fatigue degradation after salt spray ageing of electromagnetically riveted joints for CFRP/Al hybrid structure, Mater Des, vol.142, pp.297-307, 2018.

J. Ara-ujo, L. Susmel, and M. Pires, A multiaxial stressbased critical distance methodology to estimate fretting fatigue life, Tribol Int, vol.108, pp.2-6, 2017.

M. Donachie, W. Danesi, and A. Pinkowish, Effects of salt atmosphere on crack sensitivity of commercial titanium alloys at 600 to 900 F. In: Stress-corrosion cracking of titanium, 1966.

E. Saunders, T. Chapman, and A. Walker, Understanding the "blue spot": sodium chloride hot salt stress-corrosion cracking in titanium-6246 during fatigue testing at low pressure, Eng Fail Anal, vol.61, pp.2-20, 2016.

M. J. Runa, M. T. Mathew, and L. A. Rocha, Tribocorrosion response of the Ti6Al4V alloys commonly used in femoral stems, Tribol Int, vol.68, pp.85-93, 2013.

V. Pejakovi-c, T. V. Ripoll, and M. R. , Tribocorrosion behaviour of Ti6Al4V in artificial seawater at low contact pressures, Tribol Int, vol.119, pp.55-65, 2018.

P. C. Zhao, S. X. Li, and Y. F. Jia, Very high-cycle fatigue behaviour of T i-6 A l-4 V alloy under corrosive environment, Fatigue Fract Eng Mater Struct, vol.41, pp.881-893, 2018.

E. Tal-gutelmacher and D. Eliezer, Hydrogen-assisted degradation of titanium based alloys, Mater Trans, vol.45, pp.1594-1600, 2004.

N. Diomidis, J. Celis, and P. Ponthiaux, Tribocorrosion of stainless steel in sulfuric acid: identification of corrosion-wear components and effect of contact area, Wear, vol.269, pp.93-103, 2010.
URL : https://hal.archives-ouvertes.fr/hal-01247265

F. Contu, B. Elsener, and H. B?-ohni, A study of the potentials achieved during mechanical abrasion and the repassivation rate of titanium and Ti6Al4V in inorganic buffer solutions and bovine serum, Electrochim Acta, vol.50, pp.33-41, 2004.

I. Milo-sev, . Metiko-s-hukovi-c-m, and H. Strehblow, Passive film on orthopaedic TiAlV alloy formed in physiological solution investigated by X-ray photoelectron spectroscopy, Biomaterials, vol.21, pp.2103-2113, 2000.

C. Yu, S. Zhu, and D. Wei, Oxidation and H 2 O/NaClinduced corrosion behavior of sputtered Ni-Si coatings on Ti6Al4V at 600-650 C, Surf Coat Technol, vol.201, pp.7530-7537, 2007.