J. Barbosa and P. Teixeira, Development of probiotic fruit juice powders by spraydrying: a review, Food Rev. Int, vol.9129, pp.1-24, 2016.

M. , Formulating drug delivery systems by spray drying, Dry. Technol, vol.24, pp.433-446, 2006.

M. Munoz-ibanez, M. Nuzzo, C. Turchiuli, B. Bergenståhl, E. Dumoulin et al., The microstructure and component distribution in spray-dried emulsion particles, Food Struct, vol.8, pp.16-24, 2016.

R. Vehring, Pharmaceutical particle engineering via spray drying, Pharm. Res, vol.25, pp.999-1022, 2008.

A. Paudel, Z. A. Worku, J. Meeus, S. Guns, and G. V. Mooter, Manufacturing of solid dispersions of poorly water soluble drugs by spray drying : formulation and process considerations, Int. J. Pharm, vol.453, pp.253-284, 2013.

R. Balgis, G. M. Anilkumar, S. Sago, T. Ogi, and K. Okuyama, Rapid in Situ Synthesis of Spherical Microflower Pt/C Catalyst via Spray-Drying for High Performance, Fuel Cell Application, pp.665-669, 2012.

F. Iskandar, Nanoparticle processing for optical applications e a review, Adv. Powder Technol, vol.20, pp.283-292, 2009.

A. Stunda-zujeva, Z. Irbe, and L. Berzina-cimdina, Controlling the morphology of ceramic and composite powders obtained via spray drying -a review, Ceram. Int, vol.43, pp.11543-11551, 2017.

S. M. Thaker, P. A. Mahanwar, V. V. Patil, B. N. Thorat, P. A. Mahanwar et al., Synthesis and Spray Drying of Water-Redispersible Polymer Synthesis and Spray Drying of Water-Redispersible Polymer, vol.3937, 2010.

M. Pal, L. Wan, Y. Zhu, Y. Liu, Y. Liu et al., Scalable synthesis of mesoporous titania microspheres via spray-drying method, J. Colloid Interface Sci, vol.479, pp.150-159, 2016.

S. Wanning, R. Süverkrüp, and A. Lamprecht, Pharmaceutical spray freeze drying, Int. J. Pharm, vol.488, pp.136-153, 2015.

W. D. Wu, K. C. Patel, S. Rogers, and X. D. Chen, Monodisperse droplet generators as potential atomizers for spray drying technology, Dry. Technol, vol.25, 2007.

A. Sosnik and K. P. Seremeta, Advantages and challenges of the spray-drying technology for the production of pure drug particles and drug-loaded polymeric carriers, Adv. Colloid Interface Sci, vol.223, pp.40-54, 2015.

S. Zellmer, G. Garnweitner, T. Breinlinger, T. Kraft, and C. Schilde, Hierarchical structure formation of nanoparticulate spray-dried composite aggregates, ACS Nano, vol.9, pp.10749-10757, 2015.

H. M. Hassan and C. J. Mumford, Mechanisms drying of skin-forming materials. I.Droplets of material which gelatinised at high temperature, Dry. Technol, vol.11, pp.1713-1750, 1993.

C. Sadek, P. Schuck, Y. Fallourd, N. Pradeau, C. L. Floch-fou-er-e et al., Drying of a single droplet to investigate processestructureefunction relationships: a review, Dairy Sci. Technol, vol.95, pp.771-794, 2015.

J. Elversson, K. Andersson, and A. Millqvist-fureby, An atomic force microscopy approach for assessment of particle density applied to single spray-dried carbohydrate particles, J. Pharm. Sci, vol.96, pp.905-912, 2007.

J. Elversson, A. Millqvist-fureby, G. Alderborn, and U. Elofsson, Droplet and particle size relationship and shell thickness of inhalable lactose particles during spray drying, J. Pharm. Sci, vol.92, pp.900-910, 2003.

J. Elversson and A. , Millqvist-Fureby, Particle size and density in spray dryingeffects of carbohydrate properties, J. Pharm. Sci, vol.94, pp.2049-2060, 2005.

H. Steckel and H. G. Brandes, A novel spray-drying technique to produce low density particles for pulmonary delivery, Int. J. Pharm, vol.278, pp.187-195, 2004.

X. Li, N. Anton, T. M. Ta, M. Zhao, N. Messaddeq et al., Microencapsulation of nanoemulsions: novel Trojan particles for bioactive lipid molecule delivery, Int. J. Nanomed, vol.6, pp.1313-1325, 2011.

S. Shamaei, A. Kharaghani, S. S. Seiiedlou, M. Aghbashlo, F. Sondej et al., Drying behavior and locking point of single droplets containing functional oil, Adv. Powder Technol, vol.27, pp.1750-1760, 2016.

A. B. Nandiyanto and K. Okuyama, Progress in developing spray-drying methods for the production of controlled morphology particles: from the nanometer to submicrometer size ranges, Adv. Powder Technol, vol.22, pp.1-19, 2011.

J. Bahadur, D. Sen, S. Mazumder, B. Paul, H. Bhatt et al., Control of buckling in colloidal droplets during evaporation-induced assembly of nanoparticles, Langmuir, vol.28, 2012.

M. Mezhericher, A. Levy, and I. Borde, Modelling the morphological evolution of nanosuspension droplet in constant-rate drying stage, Chem. Eng. Sci, vol.66, pp.884-896, 2011.

G. Marty and N. Tsapis, Monitoring the buckling threshold of drying colloidal droplets using water-ethanol mixtures, Europ. Phys. J. E, vol.27, pp.213-219, 2008.

L. Pauchard and Y. Couder, Invagination during the collapse of an inhomogeneous spheroidal shell, Europhys. Lett, vol.66, pp.667-673, 2004.

C. Sadek, P. Schuck, Y. Fallourd, N. Pradeau, R. Jeantet et al., Fou er e, Buckling and collapse during drying of a single aqueous dispersion of casein micelle droplet, Food Hydrocolloids, vol.52, pp.161-166, 2016.

X. Chen, V. Boyko, J. Rieger, F. Reinhold, B. Reck et al., Buckling-induced structural transition during the drying of a polymeric latex droplet on a solid surface, Soft Matter, vol.8, p.12093, 2012.

D. H. Charlesworth and W. R. Marshall, Evaporation from drops containing dissolved solids, AIChE J, vol.6, pp.9-23, 1960.

D. E. Walton and C. J. Mumford, The morphology of spray-dried particles: the effect of process variables upon the morphology of spray-dried particles, Chem. Eng. Res. Des, vol.77, pp.442-460, 1999.

U. V. Shah, V. Karde, C. Ghoroi, and J. Y. Heng, Influence of particle properties on powder bulk behaviour and processability, Int. J. Pharm, vol.518, pp.138-154, 2017.

P. Schuck, R. Jeantet, B. Bhandari, X. D. Chen, I. T. Perrone et al., Recent advances in spray drying relevant to the dairy industry: a comprehensive critical review, Dry. Technol, vol.34, pp.1773-1790, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01454652

D. L. Pearce, A novel way to measure the concentration of a spray in a spray dryer, Dry. Technol, vol.24, pp.777-781, 2006.

W. Liu, X. D. Chen, and C. Selomulya, On the spray drying of uniform functional microparticles, Particuology, vol.22, pp.1-12, 2015.

C. Sadek, H. Li, P. Schuck, Y. Fallourd, N. Pradeau et al., To what extent do whey and casein micelle proteins influence the morphology and properties of the resulting powder?, Dry. Technol, vol.32, pp.1540-1551, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01209683

E. M. Both, A. M. Karlina, R. M. Boom, and M. A. Schutyser, Morphology development during sessile single droplet drying of mixed maltodextrin and whey protein solutions, Food Hydrocolloids, vol.75, pp.202-210, 2018.

D. Heng, S. H. Lee, W. K. Ng, and R. B. Tan, The nano spray dryer B-90, pp.965-972, 2011.

N. Fu, M. W. Woo, and X. D. Chen, Single droplet drying technique to study drying kinetics measurement and particle functionality: a review, Dry. Technol, vol.30, pp.1771-1785, 2012.

S. Ne-si-c and J. Vodnik, Kinetics of droplet evaporation, Chem. Eng. Sci, vol.46, pp.527-537, 1991.

T. M. El-sayed, D. A. Wallack, and C. J. King, Changes in particle morphology during drying of drops of carbohydrate solutions and food liquids. 1. Effect of composition and drying conditions, Ind. Eng. Chem. Res, vol.29, pp.2346-2354, 1990.

S. X. Lin and X. D. Chen, Improving the Glass-Filament Method for Accurate Measurement of Drying Kinetics of Liquid Droplets, vol.80, 2002.

J. Lin and J. W. Gentry, Spray drying drop morphology: experimental study, Aerosol Sci. Technol, vol.37, pp.15-32, 2003.

A. G. Marín, H. Gelderblom, A. Susarrey-arce, A. Van-houselt, L. Lefferts et al., Building microscopic soccer balls with evaporating colloidal fakir drops, Proc. Natl. Acad. Sci. U.S.A, vol.109, pp.16455-16458, 2012.

W. Xu and C. Choi, Effects of surface topography and colloid particles on the evaporation kinetics of sessile droplets on superhydrophobic surfaces, J. Heat Transf, vol.134, p.51022, 2012.

P. Papadopoulos, X. Deng, L. Mammen, D. M. Drotlef, G. Battagliarin et al., Wetting on the microscale: shape of a liquid drop on a microstructured surface at different length scales, Langmuir, vol.28, pp.8392-8398, 2012.

J. Perdana, M. B. Fox, M. A. Schutyser, and R. M. Boom, Mimicking spray drying by drying of single droplets deposited on a flat surface, Food Bioprocess Technol, vol.6, pp.964-977, 2013.

C. Groenewold, C. Oser, H. Groenewold, and E. Tsotsas, Determination of singleparticle drying kinetics in an acoustic levitator, Chem. Eng. J, vol.86, pp.217-222, 2002.

A. L. Yarin, G. Brenn, O. Kastner, and C. Tropea, Drying of acoustically levitated droplets of liquid-solid suspensions: evaporation and crust formation, Phys. Fluids, vol.14, pp.2289-2298, 2002.

R. Mondragon, L. Hernandez, J. E. Julia, J. C. Jarque, S. Chiva et al., Study of the drying behavior of high load multiphase droplets in an acoustic levitator at high temperature conditions, Chem. Eng. Sci, vol.66, pp.2734-2744, 2011.

M. Griesing, H. Grosshans, T. Hellwig, R. Sedelmayer, S. Gopireddy et al., Influence of the Drying Air Humidity on the Particle Formation of Single Mannitol-Water Droplets, pp.1-9, 2015.

B. Adhikari, T. Howes, B. R. Bhandari, and V. Truong, Experimental studies and kinetics of single drop drying and their relevance in drying of sugar-rich foods: a review, Int. J. Food Prop, vol.3, pp.323-351, 2000.

L. Hennet, V. Cristiglio, J. Kozaily, I. Pozdnyakova, H. E. Fischer et al., Aerodynamic levitation and laser heating: applications at synchritrin and neutron sources, Eur. Phys. J. Spec. Top, vol.196, pp.151-165, 2011.

J. K. Weber, A. Tamalonis, C. J. Benmore, O. L. Alderman, S. Sendelbach et al., Aerodynamic levitator for in situ x-ray structure measurements on high temperature and molten nuclear fuel materials, Rev. Sci. Instrum, vol.87, p.73902, 2016.

A. Baldelli, M. A. Boraey, D. S. Nobes, and R. Vehring, Analysis of the particle formation process of structured microparticles, Mol. Pharm, vol.12, pp.2562-2573, 2015.

S. Rogers, W. D. Wu, S. X. Lin, and X. D. Chen, Particle shrinkage and morphology of milk powder made with a monodisperse spray dryer, Biochem. Eng. J, vol.62, pp.92-100, 2012.

M. Foerster, T. Gengenbach, M. W. Woo, and C. Selomulya, The impact of atomization on the surface composition of spray-dried milk droplets, Colloids Surfaces B Biointerfaces, vol.140, pp.460-471, 2016.

C. Sadek, L. Pauchard, P. Schuck, Y. Fallourd, N. Pradeau et al., Mechanical properties of milk protein skin layers after drying: understanding the mechanisms of particle formation from whey protein isolate and native phosphocaseinate, Food Hydrocolloids, vol.48, pp.8-16, 2015.

M. Eslamian and N. Ashgriz, Evaporation and evolution of suspended solution droplets at atmospheric and reduced pressures, Dry. Technol, vol.25, pp.999-1010, 2007.

M. H. Sadafi, I. Jahn, A. B. Stilgoe, and K. Hooman, A theoretical model with experimental verification for heat and mass transfer of saline water droplets, Int. J. Heat Mass Transf, vol.81, pp.1-9, 2015.

M. A. Haque, B. Adhikari, and A. Putranto, Predictions of drying kinetics of aqueous droplets containing WPI-lactose and WPI-trehalose by application of composite reaction engineering approach (REA), J. Food Eng, vol.189, pp.29-36, 2016.

B. Adhikari, T. Howes, and B. R. Bhandari, Use of solute fixed coordinate system and method of lines for prediction of drying kinetics and surface stickiness of single droplet during convective drying, Chem. Eng. Process: Process Intens, vol.46, pp.405-419, 2007.

Y. Wang, L. Che, C. Selomulya, and X. D. Chen, Droplet drying behaviour of docosahexaenoic acid (DHA)-containing emulsion, Chem. Eng. Sci, vol.106, pp.181-189, 2014.

Y. Wang, L. Che, N. Fu, X. D. Chen, and C. Selomulya, Surface formation phenomena of DHA-containing emulsion during convective droplet drying, J. Food Eng, vol.150, pp.50-61, 2015.

N. Fu, W. D. Wu, M. Yu, F. T. Moo, M. W. Woo et al., In situ observation on particle formation process via single droplet drying apparatus: effects of precursor composition on particle morphology, Dry. Technol, vol.34, pp.1700-1708, 2016.

I. Gouaou, M. S. Koutchoukali, and A. Kharaghani, Experimental study of drying conditions on starch single droplet shrinkage and morphology during drying, Third International Conference on Energy, pp.326-332, 2016.

S. X. Lin and X. D. Chen, Changes in milk droplet diameter during drying under constant drying conditions investigated using the glass-filament method, Food Bioprod, Process, vol.82, pp.213-218, 2004.

J. H. Chew, N. Fu, T. Gengenbach, X. D. Chen, and C. Selomulya, The compositional effects of high solids model emulsions on drying behaviour and particle formation processes, J. Food Eng, vol.157, pp.33-40, 2015.

N. Fu, M. W. Woo, C. Selomulya, and X. D. Chen, Shrinkage behaviour of skim milk droplets during air drying, J. Food Eng, vol.116, pp.37-44, 2013.

N. Fu, M. W. Woo, and X. D. Chen, Colloidal transport phenomena of milk components during convective droplet drying, Colloids Surfaces B Biointerfaces, vol.87, pp.255-266, 2011.

M. Foerster, T. Gengenbach, M. W. Woo, and C. Selomulya, The influence of the chemical surface composition on the drying process of milk droplets, Adv. Powder Technol, vol.27, pp.2324-2334, 2016.

A. Al-mubarak, M. Belkharchouche, M. Al-hayan, and A. Husain, Mechanisms of single droplet drying, Kuwait J. Sci. Eng, vol.37, pp.161-179, 2010.

A. Saha, S. Basu, and R. Kumar, Particle image velocimetry and infrared thermography in a levitated droplet with nanosilica suspensions, Exp. Fluid, vol.52, pp.795-807, 2012.

K. Han, G. Song, X. Ma, and B. Yang, An experimental and theoretical study of the effect of suspended thermocouple on the single droplet evaporation, Appl. Therm. Eng, vol.101, pp.568-575, 2016.

B. Zaitone and C. Tropea, Evaporation of pure liquid droplets: comparison of droplet evaporation in an acoustic field versus glass-filament, Chem. Eng. Sci, vol.66, 2011.

C. Sadek, H. Tabuteau, P. Schuck, Y. Fallourd, N. Pradeau et al., Shape, shell, and vacuole formation during the drying of a single concentrated whey protein droplet, Langmuir, vol.29, pp.15606-15613, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01150726

J. Bouman, P. Venema, R. J. De-vries, E. Van-der-linden, and M. A. Schutyser, Hole and vacuole formation during drying of sessile whey protein droplets, Food Res. Int, vol.84, p.16, 2016.

H. Al-shehri, T. S. Horozov, and V. N. Paunov, Preparation and attachment of liquid-infused porous supra-particles to liquid interfaces, Soft Matter, vol.12, pp.8375-8387, 2016.

M. A. Hampton, T. A. Nguyen, A. V. Nguyen, Z. P. Xu, L. Huang et al., Influence of surface orientation on the organization of nanoparticles in drying nanofluid droplets, J. Colloid Interface Sci, vol.377, pp.456-462, 2012.

S. Manukyan, H. M. Sauer, I. V. Roisman, K. A. Baldwin, D. J. Fairhurst et al., Imaging internal flows in a drying sessile polymer dispersion drop using Spectral Radar Optical Coherence Tomography (SR-OCT), J. Colloid Interface Sci, vol.395, pp.287-293, 2013.

Z. Sun, L. Zhou, C. Xiao, X. Du, and Y. Yang, Nanoparticle motion and deposition near the triple line in evaporating sessile water droplet on a superhydrophilic substrate, Exp. Therm. Fluid Sci, vol.76, pp.67-74, 2016.

A. G. Marín, H. Gelderblom, D. Lohse, and J. H. Snoeijer, Order-to-disorder transition in ring-shaped colloidal stains, Phys. Rev. Lett, vol.107, pp.1-4, 2011.

A. Khoufech, M. Benali, and K. Saleh, Influence of liquid formulation and impact conditions on the wetting of hydrophobic surfaces by aqueous polymeric solutions, Chem. Eng. Res. Des, vol.110, pp.233-244, 2016.

A. Khoufech, M. Benali, and K. Saleh, Influence of liquid formulation and impact conditions on the coating of hydrophobic surfaces, Powder Technol, vol.270, pp.599-611, 2015.

M. Damak, S. R. Mahmoudi, M. N. Hyder, and K. K. Varanasi, Enhancing droplet deposition through in-situ precipitation, Nat. Commun, vol.7, p.12560, 2016.

H. Grosshans, M. Griesing, M. Onckedieck, T. Hellwig, B. Walther et al., Numerical and experimental study of the drying of bi-component droplets under various drying conditions, Int. J. Heat Mass Transf, vol.96, pp.97-109, 2016.

V. Cristiglio, I. Grillo, M. Fomina, F. Wien, E. Shalaev et al., Combination of acoustic levitation with small angle scattering techniques and synchrotron radiation circular dichroism. Application to the study of protein solutions, Biochim. Biophys. Acta Gen. Subj, pp.3693-3699, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01915096

M. Kreimer, I. Aigner, S. Sacher, M. Krumme, T. Mannschott et al., Mechanical strength of microspheres produced by drying of acoustically levitated suspension droplets, Powder Technol, vol.325, pp.247-260, 2018.

R. Mondragon, J. C. Jarque, J. E. Julia, L. Hernandez, and A. Barba, Effect of slurry properties and operational conditions on the structure and properties of porcelain tile granules dried in an acoustic levitator, J. Eur. Ceram. Soc, vol.32, 2012.

A. Saha, S. Basu, and R. Kumar, Velocity and rotation measurements in acoustically levitated droplets, Phys. Lett. Sec. A: Gen. Atom. Solid State Phys, vol.376, pp.3185-3191, 2012.

B. Pathak and S. Basu, Modulation of buckling dynamics in nanoparticle laden droplets using external heating, Langmuir, vol.32, pp.2591-2600, 2016.

S. Rogers, Y. Fang, S. X. Lin, C. Selomulya, and X. D. Chen, A monodisperse spray dryer for milk powder: modelling the formation of insoluble material, Chem. Eng. Sci, vol.71, 2012.

W. D. Wu, W. Liu, T. Gengenbach, M. W. Woo, C. Selomulya et al., Towards spray drying of high solids dairy liquid: effects of feed solid content on particle structure and functionality, J. Food Eng, vol.123, pp.130-135, 2014.

J. Quiño, T. Hellwig, M. Griesing, W. Pauer, H. U. Moritz et al., One-dimensional Raman spectroscopy and shadowgraphy for the analysis of the evaporation behavior of acetone/water drops, Int. J. Heat Mass Transf, vol.89, pp.406-413, 2015.

J. Quiño, M. Ruehl, T. Klima, F. Ruiz, S. Will et al., Supercritical drying of aerogel: in situ analysis of concentration profiles inside the gel and derivation of the effective binary diffusion coefficient using Raman spectroscopy, J. Supercrit. Fluids, vol.108, pp.1-12, 2016.

A. Braeuer, O. S. Knauer, J. Quiño, and A. Leipertz, Quantification of the mass transport in a two phase binary system at elevated pressures applying Raman spectroscopy: pendant liquid solvent drop in a supercritical carbon dioxide environment, Int. J. Heat Mass Transf, vol.62, pp.729-740, 2013.

F. Lemoine and G. Castanet, Temperature and chemical composition of droplets by optical measurement techniques: a state-of-the-art review, Exp. Fluid, vol.54, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01431048

J. D. Griffith, A. E. Bayly, and M. L. Johns, Magnetic resonance studies of detergent drop drying, Chem. Eng. Sci, vol.63, pp.3449-3456, 2008.

T. A. Langrish and T. K. Kockel, The assessment of a characteristic drying curve for milk powder for use in computational fluid dynamics modelling, vol.84, pp.69-74, 2001.

K. C. Patel and X. D. Chen, Prediction of spray-dryied product quality using two simple drying kinetics models, vol.28, pp.567-594, 2005.

X. D. Chen and S. X. Lin, Air drying of milk droplet under constant and timedependent conditions, AIChE J, vol.51, pp.1790-1799, 2005.

X. Chen and G. Xie, Fingerprints of the drying behaviour of particulate or thin layer food materials established using a reaction engineering model, Food Bioprod. Process, vol.75, pp.213-222, 1997.

Y. Jin and X. X. Chen, Numerical study of the drying process of different sized particles in an industrial-scale spray dryer, Dry. Technol, vol.27, pp.371-381, 2009.

X. Yang, J. Xiao, M. Woo, and X. D. Chen, Three-dimensional numerical investigation of a mono-disperse droplet spray dryer: validation aspects and multi-physics exploration, Dry. Technol, vol.33, p.141217112010003, 2014.

O. A. George, X. D. Chen, J. Xiao, M. Woo, and L. Che, Modeling and simulation of the polymeric nanocapsule formation process, AIChE J, vol.61, pp.4140-4151, 2015.

K. C. Patel, X. D. Chen, and S. X. Lin, A composite reaction engineering approach to drying of aqueous droplets containing sucrose, maltodextrin (DE6) and their mixtures, AIChE J, vol.55, pp.217-231, 2009.

A. Osman, L. Goehring, A. Patti, H. Stitt, and N. Shokri, Fundamental Investigation of the Drying of Solid Suspensions, 2017.

M. Mezhericher, A. Levy, and I. Borde, Theoretical drying model of single droplets containing insoluble or dissolved solids, Dry. Technol, vol.25, pp.1025-1032, 2007.

R. Vehring, W. R. Foss, and D. Lechuga-ballesteros, Particle formation in spray drying, J. Aerosol Sci, vol.38, 2007.

J. H. Chew, M. W. Woo, X. D. Chen, C. Selomulya, J. H. Chew et al., Mapping the shrinkage behavior of skim milk droplets during convective drying mapping the shrinkage behavior of skim milk droplets during convective drying, Dry. Technol, vol.33, pp.1101-1113, 2015.

M. Mezhericher, M. Naumann, M. Peglow, A. Levy, E. Tsotsas et al., Continuous species transport and population balance models for first drying stage of nanosuspension droplets, Chem. Eng. J, vol.210, 2012.

U. Maurice, M. Mezhericher, A. Levy, and I. Borde, Drying of droplet containing insoluble nanoscale particles: numerical simulations and parametric study, Dry. Technol, vol.31, pp.1790-1807, 2013.

U. Maurice, M. Mezhericher, A. Levy, and I. Borde, Drying of droplets containing insoluble nanoscale particles: second drying stage, Dry. Technol, vol.33, pp.1837-1848, 2015.

U. Maurice, M. Mezhericher, A. Levy, and I. Borde, Particle Formation from Droplet Containing Nanoparticles : Internal Bubble Growth, vol.3937, 2017.

S. Shamaei, S. S. Seiiedlou, M. Aghbashlo, and H. Valizadeh, Mathematical modeling of drying behavior of single emulsion droplets containing functional oil, Food Bioprod. Process, vol.101, pp.100-109, 2017.

M. H. Sadafi, I. Jahn, A. B. Stilgoe, and K. Hooman, Theoretical and experimental studies on a solid containing water droplet, Int. J. Heat Mass Transf, vol.78, pp.25-33, 2014.

N. Grasmeijer, H. W. Frijlink, and W. L. Hinrichs, Model to predict inhomogeneous protein-sugar distribution in powders prepared by spray drying, J. Aerosol Sci, vol.101, pp.22-33, 2016.

J. Xiao and X. D. Chen, Multiscale modeling for surface composition of spraydried two-component powders, AIChE J, vol.60, pp.2416-2427, 2014.

P. Seydel, J. Bl?-omer, and J. Bertling, Modeling particle formation at spray drying using population balances, Dry. Technol, vol.24, pp.137-146, 2006.

C. S. Handscomb, M. Kraft, and A. E. Bayly, A new model for the drying of droplets containing suspended solids, Chem. Eng. Sci, vol.64, pp.628-637, 2009.

C. S. Handscomb, M. Kraft, and A. E. Bayly, A new model for the drying of droplets containing suspended solids after shell formation, Chem. Eng. Sci, vol.64, pp.628-637, 2009.

C. S. Handscomb and M. Kraft, Simulating the structural evolution of droplets following shell formation, Chem. Eng. Sci, vol.65, pp.713-725, 2010.

L. Malafonte, L. Ahrn-e, E. Kaunisto, F. Innings, and A. Rasmuson, Estimation of the effective diffusion coefficient of water in skim milk during single-drop drying, J. Food Eng, vol.147, pp.111-119, 2015.

S. Poozesh, N. Stiawan, F. Arce, P. Sundararajan, J. D. Rocca et al., Understanding the process-product-performance interplay of spray dried drug-polymer systems through complete structural and chemical characterization of single spray dried particles, Powder Technol, pp.685-695, 2017.

D. A. Leclair, E. D. Cranston, Z. Xing, and M. R. Thompson, Optimization of spray drying conditions for yield, particle size and biological activity of thermally stable viral vectors, Pharm. Res, vol.33, pp.2763-2776, 2016.

R. Mondragon, J. E. Julia, A. Barba, and J. C. Jarque, Microstructure and mechanical properties of grains of silica nanofluids dried in an acoustic levitator, J. Eur. Ceram. Soc, vol.32, pp.4295-4304, 2012.