Z. Yang and A. Bandivekar, Light-duty vehicle greenhouse gas and fuel economy standards, Tech. Rep., Int. Counc. Clean Transport, 2017.

T. Renault, Developments in thermoplastic composites for automotive applications, Franco-British Symposium on Composite Materials, 2015.

M. Hou, Stamp forming of fabric-reinforced thermoplastic composites, Polym. Compos, vol.17, issue.4, pp.596-603, 1996.

A. R. Offringa, Thermoplastic composites-rapid processing applications, Compos. Appl. Sci. Manuf, vol.27, issue.4, pp.48-55, 1996.

O. Diestel and J. Hausding, Pre-impregnated textile semi-finished products (prepregs), pp.361-379, 2016.

J. Faraj, N. Boyard, B. Pignon, J. Bailleul, D. Delaunay et al., Crystallization kinetics of new low viscosity polyamides 66 for thermoplastic composites processing, Thermochim. Acta, vol.624, pp.27-34, 2016.

P. Boisse, N. Hamila, E. Guzman-maldonado, A. Madeo, G. Hivet et al., The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review, Int. J. Material Form, vol.10, issue.4, pp.473-492, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01313827

N. Svensson, R. Shishoo, and M. Gilchrist, Manufacturing of thermoplastic composites from commingled yarns-A review, J. Thermoplast. Compos. Mater, vol.11, issue.1, pp.22-56, 1998.

N. Bernet, V. Michaud, P. E. Bourban, and J. A. Manson, An impregnation model for the consolidation of thermoplastic composites made from commingled yarns, J. Compos. Mater, vol.33, issue.8, pp.751-772, 1999.

N. Bernet, V. Michaud, P. Bourban, and J. Månson, Commingled yarn composites for rapid processing of complex shapes, Compos. Appl. Sci. Manuf, vol.32, issue.11, pp.180-189, 2001.

U. Thomann, Direct Stamp Forming of Non-consolidated Carbon/thermoplastic Fibre Commingled Yarns, 2003.

U. Thomann, M. Sauter, and P. Ermanni, A combined impregnation and heat transfer model for stamp forming of unconsolidated commingled yarn preforms, Compos. Sci. Technol, vol.64, pp.1637-1651, 2004.

D. Trudel-boucher, B. Fisa, J. Denault, and P. Gagnon, Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics, Compos. Sci. Technol, vol.66, issue.3-4, pp.555-570, 2006.

M. Wakeman, L. Zingraff, P. Bourban, J. Månson, and P. Blanchard, Stamp forming of carbon fibre/PA12 composites -a comparison of a reactive impregnation process and a commingled yarn system, Compos. Sci. Technol, vol.66, issue.1, pp.19-35, 2006.

M. Connor, Consolidation Mechanisms and Interfacial Phenomena in Thermoplastic Powder Impregnated Composites, 1995.

E. Guzman-maldonado, N. Hamila, P. Boisse, and J. Bikard, Thermomechanical analysis, modelling and simulation of the forming of pre-impregnated thermoplastics composites, Compos. Appl. Sci. Manuf, vol.78, pp.211-222, 2015.

E. Guzman-maldonado, N. Hamila, N. Naouar, G. Moulin, and P. Boisse, Simulation of thermoplastic prepreg thermoforming based on a visco-hyperelastic model and a thermal homogenization, Mater. Des, vol.93, pp.431-442, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02174933

M. Machado, M. Fischlschweiger, and Z. Major, A rate-dependent non-orthogonal constitutive model for describing shear behaviour of woven reinforced thermoplastic composites, Compos. Appl. Sci. Manuf, vol.80, pp.194-203, 2016.

P. Harrison, M. Clifford, and A. Long, Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments, Compos. Sci. Technol, vol.64, pp.1453-1465, 2004.

G. Lebrun, M. N. Bureau, and J. Denault, Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics, Compos. Struct, vol.61, issue.4, pp.57-63, 2003.

B. Zhu, T. Yu, and X. Tao, Large deformation and slippage mechanism of plain woven composite in bias extension, Compos. Appl. Sci. Manuf, vol.38, issue.8, pp.1821-1828, 2007.

J. Cao, R. Akkerman, P. Boisse, J. Chen, H. Cheng et al., Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results, Compos. Appl. Sci. Manuf, vol.39, issue.6, pp.1037-1053, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01658046

, Evolite XA1481 Technical Data Sheet, 2012.

S. R. Iyer and L. T. , Manufacture of powder-impregnated thermoplastic composites, J. Thermoplast. Compos. Mater, vol.3, issue.4, pp.325-355, 1990.

L. M. Dangora, C. J. Hansen, C. J. Mitchell, J. A. Sherwood, and J. C. Parker, Challenges associated with shear characterization of a cross-ply thermoplastic lamina using picture frame tests, Compos. Appl. Sci. Manuf, vol.78, pp.181-190, 2015.

X. Peng and J. Cao, , 2003.

J. Schindelin, I. Arganda-carreras, E. Frise, V. Kaynig, M. Longair et al., Fiji: an open-source platform for biological-image analysis, Nat. Methods, vol.9, issue.7, pp.676-682, 2012.

J. Launay, G. Hivet, A. V. Duong, and P. Boisse, Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements, Compos. Sci. Technol, vol.68, issue.2, pp.506-515, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00498991

F. Härtel and P. Harrison, Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics, Compos. Appl. Sci. Manuf, vol.67, pp.61-69, 2014.

G. Hivet, E. Vidal-sallé, and P. Boisse, Analysis of the stress components in a textile composite reinforcement, J. Compos. Mater, vol.47, issue.3, pp.269-285, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00785642

Z. Dong and C. Sun, Testing and modeling of yarn pull-out in plain woven Kevlar fabrics, Compos. Appl. Sci. Manuf, vol.40, issue.12, pp.1863-1869, 2009.

M. Machado, L. Murenu, M. Fischlschweiger, and Z. Major, Analysis of the thermomechanical shear behaviour of woven-reinforced thermoplastic-matrix composites during forming, Compos. Appl. Sci. Manuf, vol.86, pp.39-48, 2016.

S. Haanappel, R. Thije, U. Sachs, B. Rietman, and R. Akkerman, Formability analyses of uni-directional and textile reinforced thermoplastics, Compos. Appl. Sci. Manuf, vol.56, pp.80-92, 2014.

D. Durville, Simulation of the mechanical behaviour of woven fabrics at the scale of fibers, Int. J. Material Form, vol.3, issue.S2, pp.1241-1251, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00495110

P. Badel, E. Vidal-sallé, E. Maire, and P. Boisse, Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale, Compos. Sci. Technol, vol.68, issue.12, pp.2433-2440, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00850080

R. Thije, R. Akkerman, and J. Huétink, Large deformation simulation of anisotropic material using an updated Lagrangian finite element method, Comput. Methods Appl. Mech. Eng, vol.196, pp.3141-3150, 2007.

N. Hamila, P. Boisse, F. Sabourin, and M. Brunet, A semi-discrete shell finite element for textile composite reinforcement forming simulation, Int. J. Numer. Methods Eng, vol.79, issue.12, pp.1443-1466, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00515898

P. Boisse, N. Hamila, E. Vidal-sallé, and F. Dumont, Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses, Compos. Sci. Technol, vol.71, issue.5, pp.683-692, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00578046

R. Pierce, B. Falzon, M. Thompson, and R. Boman, Implementation of a non-orthogonal constitutive model for the finite element simulation of textile composite draping, Appl. Mech. Mater, vol.553, pp.76-81, 2014.

M. Khan, T. Mabrouki, E. Vidal-sallé, and P. Boisse, Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark, J. Mater. Process. Technol, vol.210, issue.2, pp.378-388, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00505131

X. Peng and J. Cao, A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics, Compos. Appl. Sci. Manuf, vol.36, issue.6, pp.859-874, 2005.

M. H. Kashani, A. Rashidi, B. Crawford, and A. Milani, Analysis of a two-way tensionshear coupling in woven fabrics under combined loading tests: global to local transformation of non-orthogonal normalized forces and displacements, Compos. Appl. Sci. Manuf, vol.88, pp.272-285, 2016.

M. Komeili and A. Milani, On effect of shear-tension coupling in forming simulation of woven fabric reinforcements, Compos. B Eng, vol.99, pp.17-29, 2016.

G. Cowper and P. Symonds, Strain Hardening and Strain-Rate Effects In the Impact Loading of Cantilever Beams, 1957.

R. Waltz, J. Morales, J. Nocedal, and D. Orban, An interior algorithm for nonlinear optimization that combines line search and trust region steps, Math. Program, vol.107, issue.3, pp.391-408, 2005.

N. Hamila and P. Boisse, Locking in simulation of composite reinforcement deformations. Analysis and treatment, Compos. Appl. Sci. Manuf, vol.53, pp.109-117, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00938611

S. Lomov, P. Boisse, E. Deluycker, F. Morestin, K. Vanclooster et al., Full-field strain measurements in textile deformability studies, Compos. Appl. Sci. Manuf, vol.39, issue.8, pp.1232-1244, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01657911

H. Bersee and L. Robroek, The role of the thermoplastic matrix in forming processes of composite materials, Compos. Manuf, vol.2, issue.3-4, pp.90143-90148, 1991.

A. Johnson, Rheological model for the forming of fabric-reinforced thermoplastic sheets, Compos. Manuf, vol.6, issue.3-4, p.95006, 1995.

R. Thije, R. Akkerman, M. Ubbink, and L. Van-der-meer, A lubrication approach to friction in thermoplastic composites forming processes, Compos. Appl. Sci. Manuf, vol.42, issue.8, pp.950-960, 2011.

L. Liu, J. Chen, J. L. Gorczyca, and J. A. Sherwood, Modeling of friction and shear in thermostamping of composites -Part II, J. Compos. Mater, vol.38, issue.21, pp.1931-1947, 2004.

J. L. Gorczyca, J. A. Sherwood, L. Liu, and J. Chen, Modeling of friction and shear in thermostamping of composites -Part I, J. Compos. Mater, vol.38, issue.21, pp.1911-1929, 2004.

L. Liu, J. Chen, B. Zhu, T. Yu, X. Tao et al., The yarn-to-yarn friction of woven fabrics, Proceedings of the 9th ESAFORM Conference, 2006.

B. Cornelissen, B. Rietman, and R. Akkerman, Frictional behaviour of high performance fibrous tows: friction experiments, Compos. Appl. Sci. Manuf, vol.44, pp.95-104, 2013.

U. Sachs, R. Akkerman, K. Fetfatsidis, E. Vidal-sallé, J. Schumacher et al., Characterization of the dynamic friction of woven fabrics: experimental methods and benchmark results, Compos. Appl. Sci. Manuf, vol.67, pp.289-298, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01071016

L. Montero, S. Allaoui, and G. Hivet, Characterisation of the mesoscopic and macroscopic friction behaviours of glass plain weave reinforcement, Compos. Appl. Sci. Manuf, vol.95, pp.257-266, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01763182

R. Akkerman, A continuum mechanics analysis of shear characterisation methods, Compos. Appl. Sci. Manuf, vol.109, pp.131-140, 2018.

T. Baumard, O. De-almeida, G. Menary, Y. L. Maoult, F. Schmidt et al., Determination of thermal contact conductance in vacuum-bagged thermoplastic prepreg stacks using infrared thermography, AIP Conference Proceedings 1769, Author(s), 2016.
URL : https://hal.archives-ouvertes.fr/hal-01609112

Q. Chen, P. Boisse, C. H. Park, A. Saouab, and J. Bréard, Intra/inter-ply shear behaviors of continuous fiber reinforced thermoplastic composites in thermoforming processes, Compos. Struct, vol.93, issue.7, pp.1692-1703, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00935557

S. Allaoui, C. Cellard, and G. Hivet, Effect of inter-ply sliding on the quality of multilayer interlock dry fabric preforms, Compos. Appl. Sci. Manuf, vol.68, pp.336-345, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01213267

L. Ye, V. Klinkmuller, and K. Friedrich, Impregnation and consolidation in composites made of GF/PP powder impregnated bundles, J. Thermoplast. Compos. Mater, vol.5, issue.1, pp.32-48, 1992.

M. Connor, S. Toll, J. A. Månson, and A. G. Gibson, A model for the consolidation of aligned thermoplastic powder impregnated composites, J. Thermoplast. Compos. Mater, vol.8, issue.2, pp.138-162, 1995.