W. Daud, R. E. Rosli, E. H. Majlan, S. Hamid, and M. R. , PEM fuel cell system control: a review, Renew Energy, vol.113, 2017.

S. M. Rakhtala and E. S. Roudbari, Application of PEM fuel cell for stand-alone based on a Fuzzy PID control, Bulletin EEI, vol.5, 2016.

O. Erdinc and M. Uzunoglu, Recent trends in PEM fuel cellpowered hybrid systems: investigation of application areas, design architectures and energy management approaches, Renew Sustain Energy Rev, vol.14, pp.2874-84, 2010.

M. T. Gencoglu and Z. Ural, Design of a PEM fuel cell system for residential application, Int J Hydrogen Energy, pp.5242-5250, 2009.

M. Gurz, E. Baltacioglu, Y. Hames, and K. Kaya, The meeting of hydrogen and automotive: a review, Int J Hydrogen Energy, vol.42, pp.23334-23380, 2017.

B. Acosta, P. Moretto, N. D. Miguel, R. Ortiz, F. Harskamp et al., JRC reference data from experiments of on-board hydrogen tanks fast filling, Int J Hydrogen Energy, vol.39, pp.20531-20538, 2014.

J. Zheng, J. Guo, J. Yang, Y. Zhao, L. Zhao et al., Experimental and numerical study on temperature rise within a 70MPa type III cylinder during fast refueling, Int J Hydrogen Energy, vol.38, pp.10956-62, 2013.

R. Krishna, E. Titus, M. Salimian, O. Okhay, S. Rajendran et al., Hydrogen storage for energy Application, 2012.

T. Johnson, R. Bozinoski, J. Ye, G. Sartor, J. Zheng et al., Thermal model development and validation for rapid filling of high pressure hydrogen tanks, Int J Hydrogen Energy, vol.40, pp.9803-9817, 2015.

D. Mori and K. Hirose, Recent challenges of hydrogen storage technologies for fuel cell vehicles, Int J Hydrogen Energy, vol.34, pp.4569-45742, 2009.

Y. L. Liu, Y. Z. Zhao, L. Zhao, X. Li, H. G. Chen et al., Experimental studies on temperature rise within a hydrogen cylinder during refueling, Int J Hydrogen Energy, vol.35, pp.2627-26322008, 2010.

D. Melideo and D. Baraldi, CFD analysis of fast filling strategies for hydrogen tanks and their effects on key-parameters, Int J Hydrogen Energy, vol.40, pp.735-780, 2015.

J. Guo, L. Xing, Z. Hua, C. Gu, and J. Zheng, Optimization of compressed hydrogen gas cycling test system based on multi-stage storage and self-pressurized method, Int J Hydrogen Energy, vol.41, pp.16306-16321, 2016.

K. Reddi, A. Elgowainy, and E. J. Sutherland, Hydrogen refueling station compression and storage optimization with tubetrailer deliveries, Int J Hydrogen Energy, vol.39, 2014.

W. Xiao, Y. Cheng, W. J. Lee, V. Chen, and S. Charoensri, Hydrogen filling station design for fuel cell vehicles, IEEE T Ind Appl, vol.47, pp.245-51, 2011.

G. Parks, Hydrogen station compression, storage, and dispensing technical status and costs, 2014.

M. C. Galassi, D. Baraldi, B. A. Iborra, and P. Moretto, CFD analysis of fast filling scenarios for 70MPa hydrogen type IV tanks, Int J Hydrogen Energy, vol.37, pp.6886-92, 2012.

S. Dutta, A review on production, storage of hydrogen and its utilization as an energy resource, Journal of Industrial & Engineering Chemistry, vol.20, pp.1148-56, 2014.

H. Barthelemy, M. Weber, and F. Barbier, Hydrogen storage: recent improvements and industrial perspectives, Int J Hydrogen Energy, vol.42, 2016.

F. Coquel and C. Marmignon, Review of hydrogen storage techniques for onboard vehicle applications, Int J Hydrogen Energy, vol.38, pp.14595-617, 2013.

A. M. Abdalla, S. Hossain, O. B. Nisfindy, A. T. Azad, M. Dawood et al., Hydrogen production, storage, transportation and key challenges with applications: a review, Energy Convers Manag, vol.165, pp.602-629, 2018.

B. James, Overview of hydrogen storage technologies, 2008.

, Zü ttel A. Hydrogen storage methods, Naturwissenschaften, vol.91, pp.157-72, 2004.

J. Ren, N. M. Musyoka, H. W. Langmi, M. Mathe, and S. Liao, Current research trends and perspectives on materials-based hydrogen storage solutions: a critical review, Int J Hydrogen Energy, vol.42, pp.289-311, 2017.

B. Sakintuna, F. Lamari-darkrim, and M. Hirscher, Metal hydride materials for solid hydrogen storage: a review, Int J Hydrogen Energy, vol.32, pp.1121-1161, 2007.

, Zü ttel A. Materials for hydrogen storage, Mater Today, vol.6, pp.24-33, 2003.

J. Xiao, P. Chahine, and R. , Estimation of final hydrogen temperature from refueling parameters, Int J Hydrogen Energy, vol.42, issue.11, pp.7521-7529, 2017.

S. C. Kim, S. H. Lee, and K. B. Yoon, Thermal characteristics during hydrogen fueling process of type IV cylinder, Int J Hydrogen Energy, vol.35, pp.6830-6835, 2010.

A. Suryan, H. D. Kim, and T. Setoguchi, Three dimensional numerical computations on the fast filling of a hydrogen tank under different conditions, Int J Hydrogen Energy, vol.37, pp.7600-7611, 2012.

J. Zheng, L. Li, R. Chen, P. Xu, and F. Kai, High pressure steel storage vessels used in hydrogen refueling station, J Press Vessel Technol, vol.130, pp.244-54, 2008.

N. D. Miguel, R. O. Cebolla, B. Acosta, P. Moretto, F. Harskamp et al., Compressed hydrogen tanks for on-board application: thermal behaviour during cycling, Int J Hydrogen Energy, vol.40, pp.6449-58, 2015.

I. Simonovski, D. Baraldi, D. Melideo, and B. Acosta-iborra, Thermal simulations of a hydrogen storage tank during fast filling, Int J Hydrogen Energy, vol.40, pp.12560-71, 2015.

J. Guo, J. Yang, Y. Zhao, X. Pan, L. Zhang et al., Investigations on temperature variation within a type III cylinder during the hydrogen gas cycling test, Int J Hydrogen Energy, vol.39, pp.13926-13960, 2014.

T. Moriya, Develop of the FCX fuel cell vehicle at Honda, vol.27, pp.91-97, 2003.

T. Bono, M. Kizaki, H. Mizuno, Y. Nonobe, T. Takahashi et al., Development of new TOYOTA FCHV-adv fuel cell system, Sae International Journal of Engines, vol.2, pp.948-54, 2009.

A. Yamashita, M. Kondo, S. Goto, and N. Ogami, Development of high-pressure hydrogen storage system for the Toyota "Mirai, SAE 2015 World Congress & Exhibition, 2015.

H. Wikipedia and . Nexo, , 2018.

. Wikipedia, Hyundai ix35 FCEV, 2018.

. Hyundai, All-new Hyundai NEXO e the future utility vehicle made by Hyundai, 2018.

. Driver-ca and . Toyota-mirai, , 2018.

. Hyundai, ix35 Fuel cell realizing the dream of a clean environment, 2018.

. Wikipedia and . Honda, , 2018.

. Toyota and . Toyota, Mirai technical specifications vs FCHV-adv, 2018.

. Hyundai, ix35 Fuel cell, 2018.

R. M. Darling and J. P. Meyers, Kinetic model of platinum dissolution in PEMFCs, J Electrochem Soc, vol.150, 2003.

J. Tomioka, K. Kiguchi, Y. Tamura, and H. Mitsuishi, Influence of temperature on the fatigue strength of compressedhydrogen tanks for vehicles, Int J Hydrogen Energy, vol.36, pp.2513-2522, 2011.

S. Camara, A. R. Bunsell, A. Thionnet, and D. H. Allen, Determination of lifetime probabilities of carbon fibre composite plates and pressure vessels for hydrogen storage, Int J Hydrogen Energy, vol.36, pp.6031-6039, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00595889

C. Zheng, L. Wang, R. Li, Z. Wei, and W. Zhou, Fatigue test of carbon epoxy composite high pressure hydrogen storage vessel under hydrogen environment, J Zhejiang Univ -Sci, vol.14, pp.393-400, 2014.

O. Comond, D. Perreux, F. Thiebaud, and M. Weber, Methodology to improve the lifetime of type III HP tank with a steel liner, Int J Hydrogen Energy, vol.34, pp.3077-90, 2009.

J. I. Tomioka, K. Kiguchi, Y. Tamura, and . Hj-mitsuishi, Influence of pressure and temperature on the fatigue strength of Type-3 compressed-hydrogen tanks, Int J Hydrogen Energy, vol.37, pp.17639-17683, 2012.

. Liu-yanlei, . Zhao-yongzhi, L. Zhao, and L. I. Xiang, Experimental studies on temperature rise within a hydrogen cylinder during refueling, Int J Hydrogen Energy, vol.35, pp.2627-2659, 2010.

M. Hosseini, I. Dincer, G. F. Naterer, and R. Majijohe, Thermodynamic analysis of filling compressed gaseous hydrogen storage tanks, Int J Hydrogen Energy, vol.37, pp.5063-71, 2012.

J. C. Yang, A thermodynamic analysis of refueling of a hydrogen tank, Int J Hydrogen Energy, vol.34, pp.6712-67214, 2009.

G. Wang, J. Zhou, S. Hu, S. Dong, and P. Wei, Investigations of filling mass with the dependence of heat transfer during fast filling of hydrogen cylinders, Int J Hydrogen Energy, vol.39, pp.4380-4388, 2014.

M. Monde and M. Kosaka, Understanding of thermal characteristics of fueling hydrogen high pressure tanks and governing parameters, SAE Int J Alternative Powertrains, vol.2, pp.61-68, 2013.

D. Melideo, D. Baraldi, M. C. Galassi, R. O. Cebolla, B. A. Iborra et al., CFD model performance benchmark of fast filling simulations of hydrogen tanks with pre-cooling, Int J Hydrogen Energy, vol.39, pp.4389-95, 2014.

M. Heitsch, D. Baraldi, and P. Moretto, Numerical investigations on the fast filling of hydrogen tanks, Int J Hydrogen Energy, vol.36, pp.2606-2618, 2011.

. Gtr, Proposal for a global technical regulation on hydrogen and fuel cell vehicles, 2013.

. St, Technical information report for fuel systems in fuel cell and other hydrogen vehicles, 2008.

, Gaseous hydrogen and hydrogen blendsland vehicle fuel tanks

J. Cheng, J. Xiao, P. Chahine, and R. , Estimation of final hydrogen temperatures during refueling 35 MPa and 70 MPa tanks *, Energy Procedia, vol.105, pp.1363-1372, 2017.

C. Dicken, M. , and W. , Measured effects of filling time and initial mass on the temperature distribution within a hydrogen cylinder during refuelling, J Power Sources, vol.165, pp.324-360, 2007.

J. Zheng, X. Liu, P. Xu, P. Liu, Y. Zhao et al., Development of high pressure gaseous hydrogen storage technologies, Int J Hydrogen Energy, vol.37, 2011.

D. Grouset, Temperature evolutions during high pressure hydrogen tank refuelling: modelling and time scale analysis. Singapore: Hypothesis XIII symposium, 2017.

Q. Li, J. Zhou, Q. Chang, and X. Wei, Effects of geometry and inconstant mass flow rate on temperatures within a pressurized hydrogen cylinder during refueling, Int J Hydrogen Energy, vol.37, pp.6043-52, 2012.

L. Zhao, Y. Liu, J. Yang, Y. Zhao, J. Zheng et al., Numerical simulation of temperature rise within hydrogen vehicle cylinder during refueling, Int J Hydrogen Energy, vol.35, pp.8092-100, 2010.

R. O. Cebolla, B. Acosta, N. D. Miguel, and P. Moretto, Effect of precooled inlet gas temperature and mass flow rate on final state of charge during hydrogen vehicle refueling, Int J Hydrogen Energy, vol.40, pp.4698-706, 2015.

T. Bourgeois, T. Brachmann, F. Barth, F. Ammouri, D. Baraldi et al., Optimization of hydrogen vehicle refuelling requirements, Int J Hydrogen Energy, vol.42, pp.13789-809, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02134979

N. D. Miguel, B. Acosta, D. Baraldi, R. Melideo, R. O. Cebolla et al., The role of initial tank temperature on refuelling of on-board hydrogen tanks, Int J Hydrogen Energy, vol.41, pp.8606-8621, 2016.

, CFX 11. ANSYS Inc. Southpointe, 275 Technology Drive

, FLUENT 6.2. Fluent Inc, 2003.

D. Melideo, D. Baraldi, B. Acosta-iborra, R. O. Cebolla, and P. Moretto, CFD simulations of filling and emptying of hydrogen tanks, Int J Hydrogen Energy, vol.42, pp.7304-7317, 2016.

A. Suryan, H. D. Kim, and T. Setoguchi, Comparative study of turbulence models performance for refueling of compressed hydrogen tanks, Int J Hydrogen Energy, vol.38, pp.9562-9571, 2013.

F. Menter, Zonal two equation k-w turbulence models for aerodynamic flows, 93. Nasa STI/RECON Technical Report N, 1993.

R. H. Aungier, Fast, accurate real gas equation of state for fluid dynamic analysis applications, J Fluids Eng, vol.117, pp.277-81, 1995.

D. Y. Peng and D. B. Robinson, A New Two-Constant Equation of State, 12. Minerva Ginecologica, pp.3069-78, 1976.

K. S. Pitzer, D. Z. Lippmann, R. F. Curl, C. M. Huggins, and D. E. Petersen, The volumetric and thermodynamic properties of fluids. II. Compressibility factor, vapor pressure and entropy of vaporization 1, J Am Chem Soc, vol.77, pp.3433-3473, 1955.

O. Redlich and J. N. Kwong, On the thermodynamics of solutions; an equation of state; fugacities of gaseous solutions, Chem Rev, vol.44, p.233, 1949.

M. C. Galassi, E. Papanikolaou, M. Heitsch, D. Baraldi, B. A. Iborra et al., Assessment of CFD models for hydrogen fast filling simulations, Int J Hydrogen Energy, vol.39, pp.6252-60, 2014.

E. Soa, Fueling protocols for light duty gaseous hydrogen surface vehicles (standard J2601_201407), 2014.

K. Reddi, A. Elgowainy, N. Rustagi, and E. Gupta, Impact of hydrogen SAE J2601 fueling methods on fueling time of light-duty fuel cell electric vehicles, Int J Hydrogen Energy, vol.42, pp.16675-85, 2017.

C. Dicken, Temperature distribution within a compressed gas cylinder during fast filling, Adv Mater Res, vol.15, issue.17, pp.281-287, 2007.

J. Zheng, J. Ye, J. Yang, P. Tang, L. Zhao et al., An optimized control method for a high utilization ratio and fast filling speed in hydrogen refueling stations, Int J Hydrogen Energy, vol.35, pp.3011-3018, 2010.

J. Xiao, X. Wang, P. Chahine, and R. , Determining hydrogen pre-cooling temperature from refueling parameters, Int J Hydrogen Energy, vol.41, pp.16316-16337, 2016.