, Machining of polymer composites, 2009.
Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich, Compos Part B Eng, vol.43, pp.1480-1488, 2012. ,
Machining damage in FRPs: laser versus conventional drilling, Compos Part A Appl Sci Manuf, vol.82, pp.42-52, 2016. ,
Analysis of damage mechanism and tool wear while drilling of 3D woven composite materials using internal and external cutting fluid, J Compos Mater, vol.49, pp.2687-703, 2015. ,
Machinability and surface quality during high speed trimming of multi directional CFRP, Int J Mach Mach Mater, vol.13, p.289, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-02078611
Machining of fibre reinforced plastics, CIRP Ann, vol.34, pp.60186-60189, 1985. ,
The cutting process, chips, and cutting forces in machining CFRP, Composites, vol.14, issue.83, p.90157, 1983. ,
Orthogonal cutting mechanisms of graphite/epoxy composite. Part I: unidirectional laminate, Int J Mach Tools Manuf, vol.35, pp.1623-1661, 1995. ,
Orthogonal cutting mechanisms of graphite/epoxy composite. Part II: multi-directional laminate, Int J Mach Tools Manuf, vol.35, 1994. ,
Experiment-calculation comparison of the cutting conditions representative of the long fiber composite drilling phase, Compos Sci Technol, vol.65, pp.455-66, 2005. ,
, Edge Trimming of CFRP with Diamond Interlocking Tools, 2006.
Machining damage in edge trimming of CFRP. Mater Manuf Process, 2012. ,
Delamination in surface plies of graphite/epoxy caused by edge trimming process, Process Manuf Compos Mater, vol.49, 1991. ,
Machining carbon fibre reinforced plastics: lead angle effect, Int J Mach Mach Mater, vol.13, p.311, 2013. ,
High-speed edge trimming of CFRP and online monitoring of performance of router tools using acoustic emission ,
URL : https://hal.archives-ouvertes.fr/hal-01950772
, , vol.9, 2016.
Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers, Int J Mater Form, vol.2018, pp.1-23 ,
Study of the surface defects and dust generated during trimming of CFRP: influence of tool geometry, machining parameters and cutting speed range, Compos Part A, vol.66, pp.142-54, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01952583
Effect of edge trimming on failure stress of carbon fibre polymer composites, Int J Mach Mach Mater, vol.13, p.331, 2013. ,
A novel approach to evaluate the delamination extent after edge trimming of carbon-fiber-reinforced composites, Proc Inst Mech Eng Part B J Eng Manuf, 2017. ,
Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage in machining of unidirectional CFRP composite laminates, Int J Adv Manuf Technol, vol.91, pp.3107-3127, 2017. ,
Deterioration of polycrystalline diamond tools in milling of carbon-fiber-reinforced plastic, J Compos Mater, vol.51, pp.2277-90, 2017. ,
The effect of cutting temperature in milling of carbon fiber reinforced polymer composites, Compos Part A Appl Sci Manuf, vol.91, pp.380-387, 2016. ,
Machining of carbon fibre: optical surface damage characterisation and tool wear study, Procedia CIRP, vol.45, pp.71-75, 2016. ,
Cutting performance of carbon fiber reinforced plastics using PCD tool, Adv Mater Res, vol.215, pp.14-22, 2011. ,
An optical method for measuring surface roughness of machined carbon fibre-reinforced plastic composites, J Compos Mater, vol.51, pp.289-302, 2017. ,
DOI : 10.1177/0021998316644849
URL : http://eprints.whiterose.ac.uk/106950/8/2016__Article_Journal_of_composite_materials_Kerrigan.pdf
Characterization of surface quality in machining of composites, p.704, 1999. ,
Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior, Compos Part B Eng, vol.57, pp.136-179, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01952584
Influence of machining process and machining induced surface roughness on mechanical properties of continuous fiber composites, Exp Mech, vol.55, pp.519-547, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01611014
Influence of the feed speed and the cutting distance on the depth of the machining damage when trimming is conducted with a cutting speed of 150 m/min, vol.19 ,
,
Understanding the factors affecting the compressive testing of unidirectional carbon fibre composites, Compos Part B Eng, vol.38, pp.481-488, 2007. ,
Influence of specimen preparation by machining on the failure of polymer matrix off-axis tensile coupons, Compos Sci Technol, vol.66, pp.1857-72, 2006. ,
Effect of fibre direction on surface roughness measurements of machined graphite/epoxy composite, Compos Manuf, vol.4, issue.93, p.90015, 1993. ,
The influence of surface roughness on the mechanical strength properties of machined short-fibre-reinforced thermoplastics, Compos Sci Technol, vol.60, pp.102-107, 2000. ,
Effect of tool wear on quality of carbon fiber reinforced polymer laminate during edge trimming, Appl Mech Mater, pp.325-326, 2013. ,
Edge machining effects on the failure of polymer matrix composite coupons, Compos Part A Appl Sci Manuf, vol.35, pp.989-99, 2004. ,
Surface and machining induced damage characterization of abrasive water jet milled carbon/epoxy composite specimens and their impact on tensile behavior, Wear, pp.376-377, 2017. ,
DOI : 10.1016/j.wear.2017.02.024
URL : https://hal.archives-ouvertes.fr/hal-01620031
Temperature and wear analysis in function of the cutting tool coating when drilling of composite structure: in situ measurement by optical fiber, Wear, 2017. ,
URL : https://hal.archives-ouvertes.fr/hal-01950758
, Digital Surf. Mountain Map Reference Manual
An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics, Int J Mach Tools Manuf, vol.43, issue.03, pp.90-97, 2003. ,