B. M. Beamon and J. M. Bermudo, A Hybrid Push/Pull Control Algorithm for Multi-stage, Multi-line Production Systems, Production Planning & Control, vol.11, pp.349-356, 2000.

W. C. Benton and D. C. Whybark, Material Requirements Planning (MRP) and Purchase Discounts, Journal of Operations Management, vol.2, issue.2, pp.137-143, 1982.
DOI : 10.1016/0272-6963(82)90029-8

H. Carvalho, A. P. Barroso, V. H. Machado, S. Azevedo, and V. Cruz-machado, Supply Chain Redesign for Resilience Using Simulation, Computers and Industrial Engineering, vol.62, issue.1, pp.329-341, 2012.

J. K. Cochran and H. A. Kaylani, Optimal Design of a Hybrid Push/Pull Serial Manufacturing System with Multiple Part Types, International Journal of Production Research, vol.46, pp.949-965, 2008.

J. R. Costanza, Jc-IT Institute of Technology Demand Driven Institute, 1996.

S. D. Flapper, G. J. Miltenburg, and J. Wijngaard, Embedding JIT into MRP, International Journal of Production Research, vol.29, pp.329-341, 1991.

J. Geraghty and C. Heavey, A Review and Comparison of Hybrid and Pull-type Production Control Strategies, Stochastic Modeling of Manufacturing Systems, pp.307-329, 2006.

E. M. Goldratt, J. Cox-;-gonzález-r, P. L. , J. M. Framinan, and H. Pierreval, Token-based Pull Production Control Systems: An Introductory Overview, Journal of Intelligent Manufacturing, vol.23, pp.5-22, 1992.

M. Greif, C. Moisy, and E. Pesnel, Guide Du Kanban. CIPE, 1984.

C. Ho and T. C. Ireland, Mitigating Forecast Errors by Lot-sizing Rules in ERP-Controlled Manufacturing Systems, International Journal of Production Research, vol.50, pp.3080-3094, 2012.

T. A. Hochreiter, A Comparative Simulation Study of Kanban, CONWIP, and MRP Manufacturing Control Systems in a Flow Shop, 1999.

T. J. Hodgson and D. Wang, Optimal Hybrid Push/Pull Control Strategies for a Parallel Multistage System: Part I, International Journal of Production Research, vol.29, pp.1279-1287, 1991.

T. J. Hodgson and D. Wang, Optimal Hybrid Push/Pull Control Strategies for a Parallel Multistage System: Part II, International Journal of Production Research, vol.29, pp.1453-1460, 1991.

B. W. Hollocks, Forty Years of Discrete-event Simulation-A Personal Reflection, Journal of the Operational Research Society, vol.57, pp.1383-1399, 2006.
DOI : 10.1057/palgrave.jors.2602128

W. Hopp, ML: Factory Physics, 2008.

W. Hopp and M. Spearman, Factory Physics: Foundations of Factory Management, 1996.

H. Jodlbauer and S. Reitner, Material and Capacity Requirements Planning with Dynamic Lead times, International Journal of Production Research, vol.50, issue.16, pp.4477-4492, 2012.
DOI : 10.1080/00207543.2011.603707

URL : https://hal.archives-ouvertes.fr/hal-00724885

U. Karmarkar, Push, Pull and Hybrid Control Schemes, 1986.

Y. Khojasteh and R. Sato, Selection of a Pull Production Control System in Multi-stage Production Processes, International Journal of Production Research, vol.53, pp.4363-4379, 2015.
DOI : 10.1080/00207543.2014.1001530

D. E. Koulouriotis, A. S. Xanthopoulos, and V. D. Tourassis, Simulation Optimisation of Pull Control Policies for Serial Manufacturing Lines and Assembly Manufacturing Systems Using Genetic Algorithms, International Journal of Production Research, vol.48, issue.10, pp.2887-2912, 2010.
DOI : 10.1080/00207540802603759

L. J. Krajewski, B. E. King, L. P. Ritzman, and D. S. Wong, Kanban, MRP, and Shaping the Manufacturing Environment, Management Science, vol.33, issue.1, pp.39-57, 1987.
DOI : 10.1287/mnsc.33.1.39

L. Junior, M. , and M. Godinho-filho, Variations of the Kanban System: Literature Review and Classification, International Journal of Production Economics, vol.125, issue.1, pp.13-21, 2010.

M. J. Land, Cobacabana (Control of Balance by Card-based Navigation): A Card-based System for Job Shop Control, International Journal of Production Economics, vol.117, issue.1, pp.97-103, 2009.

A. Law, Simulation Modeling and Analysis, 1991.

A. M. Law and M. G. Mccomas, Secrets of Successful Simulation Studies, Proceedings of the 23rd Conference on Winter Simulation, pp.21-27, 1991.
DOI : 10.1109/wsc.1991.185587

Y. H. Lee, M. K. Cho, S. J. Kim, and Y. B. Kim, Supply Chain Simulation with Discrete-Continuous Combined Modeling, Computers and Industrial Engineering, vol.43, issue.1-2, pp.375-392, 2002.
DOI : 10.1016/s0360-8352(02)00080-3

Z. Li, Design and Analysis of Robust Kanban System in an Uncertain Environment, 2013.

X. Li, R. Sawhney, E. J. Arendt, and K. Ramasamy, A Comparative Analysis of Management Accounting Systems' Impact on Lean Implementation, International Journal of Technology Management, vol.57, pp.33-48, 2012.

I. Manuj and J. T. Mentzer, Global Supply Chain Risk Management, Journal of Business Logistics, vol.29, issue.1, pp.133-155, 2008.

I. Manuj, J. T. Mentzer, and M. R. Bowers, Improving the Rigor of Discrete-event Simulation in Logistics and Supply Chain Research, International Journal of Physical Distribution and Logistics Management, vol.39, issue.3, pp.172-201, 2009.

S. A. Melnyk and C. J. Piper, Implementation of Material Requirements Planning: Safety Lead times, International Journal of Operations and Production Management, vol.2, issue.1, pp.52-61, 1981.
DOI : 10.1108/eb054675

S. A. Melnyk and C. J. Piper, Leadtime Errors in MRP: The Lot Sizing Effect, International Journal of Production Research, vol.23, issue.2, pp.253-264, 1985.

S. A. Melnyk, A. Rodrigues, and G. L. Ragatz, Using Simulation to Investigate Supply Chain Disruptions, Supply Chain Risk, International Series in Operations Research & Management Science, pp.103-122, 2009.
DOI : 10.1007/978-0-387-79934-6_7

R. Micilo, F. Fontanili, G. Marques, P. Bomert, and M. Lauras, RTLS-based Process Mining: Towards an Automatic Process Diagnosis in Healthcare, IEEE International Conference on Automation Science and Engineering, pp.1397-1402, 2015.
DOI : 10.1109/coase.2015.7294294

R. Miclo, Challenging the 'Demand Driven MRP' Promises': A Discrete Event Simulation Approach, 2016.
URL : https://hal.archives-ouvertes.fr/tel-01673811

R. Miclo, F. Fontanili, M. Lauras, J. Lamothe, and B. Milian, An Empirical Comparison of MRPII and Demand-driven MRP, IFAC-Pap., 8th IFAC Conference on Manufacturing Modelling, vol.49, pp.1725-1730, 2016.
DOI : 10.1016/j.ifacol.2016.07.831

R. J. Milne, C. Wang, C. A. Yen, and K. Fordyce, Optimized Material Requirements Planning for Semiconductor Manufacturing, Journal of the Operational Research Society, vol.63, pp.1566-1577, 2012.
DOI : 10.1057/jors.2012.1

R. Narasimhan and S. A. Melnyk, Assessing the Transient Impact of Lot Sizing Rules following MRP Implementation, International Journal of Production Research, vol.22, issue.5, pp.759-772, 1984.

T. Ohno, Toyota Production System: Beyond Large-scale Production, 1988.

O. A. Olaitan, A Framework for Creating Production and Inventory Control Strategies (Doctoral), Advanced Processing Technology Research Centre (APTRC), 2016.

J. Olhager, Evolution of Operations Planning and Control: From Production to Supply Chains, International Journal of Production Research, vol.51, pp.6836-6843, 2013.
DOI : 10.1080/00207543.2012.761363

J. Olhager and B. Östlund, An Integrated Push-Pull Manufacturing Strategy, European Journal of Operational Research, vol.45, pp.135-142, 1990.
DOI : 10.1016/0377-2217(90)90180-j

J. A. Orlicky, Material Requirements Planning: The New Way of Life in Production and Inventory Management, 1974.

D. J. Powell, I. Bas, and E. Alfnes, Integrating Lean and MRP: A Taxonomy of the Literature, IFIP International Conference on Advances in Production Management Systems. Sustainable Production and Service Supply Chains, pp.485-492, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01449760

C. Ptak and C. Smith, Orlicky's Material Requirements Planning 3/E, 2011.

C. Ptak and C. Smith, Demand Driven Material Requirements Planning (DDMRP), 2016.

J. Riezebos, Design of POLCA Material Control Systems, International Journal of Production Research, vol.48, pp.1455-1477, 2010.
DOI : 10.1080/00207540802570677

URL : https://hal.archives-ouvertes.fr/hal-00547997

S. Robinson, Simulation: The Practice of Model Development and Use, 2014.

T. Rossi, R. Pozzi, M. Pero, and R. Cigolini, Improving Production Planning through Finite-capacity MRP, International Journal of Production Research, vol.55, issue.2, pp.377-391, 2017.
DOI : 10.1080/00207543.2016.1177235

M. Sali and V. Giard, Monitoring the Production of a Supply Chain with a Revisited MRP Approach, Production Planning & Control, vol.26, issue.10, pp.769-785, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01277394

B. R. Sarker and J. A. Fitzsimmons, The Performance of Push and Pull Systems: A Simulation and Comparative Study, International Journal of Production Research, vol.27, issue.10, pp.1715-1731, 1989.

T. G. Schmitt, W. L. Berry, and T. E. Vollmann, An Analysis of Capacity Planning Procedures for a Material Requirements Planning System, Decision Sciences, vol.15, issue.4, p.522, 1984.
DOI : 10.1111/j.1540-5915.1984.tb01240.x

T. J. Schriber, D. T. Brunner, and J. S. Smith, How Discrete-event Simulation Software Works and Why It Matters, Winter Simulation Conference (WSC) Proceedings 1-15, 2012.
DOI : 10.1109/wsc.2012.6465274

URL : http://www.informs-sim.org/wsc12papers/includes/files/inv218.pdf

K. Sekine, One-piece Flow: Cell Design for Transforming the Production Process, 2005.

M. M. Sepehri and N. Nahavandi, Critical WIP Loops: A Mechanism for Material Flow Control in Flow Lines, International Journal of Production Research, vol.45, issue.12, pp.2759-2773, 2007.
DOI : 10.1080/00207540600787077

M. L. Spearman, D. L. Woodruff, and W. J. Hopp, CONWIP: A Pull Alternative to Kanban, International Journal of Production Research, vol.28, issue.5, pp.879-894, 1990.

, StataCorp. 2015. Stata Statistical Software: Release 14

Y. Sugimori, K. Kusunoki, F. Cho, and S. Uchikawa, Toyota Production System and Kanban System Materialization of Justin-time and Respect-for-Human System, International Journal of Production Research, vol.15, issue.6, pp.553-564, 1977.

K. Thompson, MRP II in the Repetitive Manufacturing Environment, Production and Inventory Management, vol.24, issue.4, pp.1-14, 1983.

M. Thürer, M. Stevenson, and C. W. Protzman, Card-based Production Control: A Review of the Control Mechanisms Underpinning Kanban, ConWIP, POLCA and COBACABANA Systems, Production Planning and Control, vol.27, issue.14, pp.1143-1157, 2016.

J. Venkateswaran and Y. J. Son, Impact of Modelling Approximations in Supply Chain Analysis-An Experimental Study, International Journal of Production Research, vol.42, issue.15, pp.2971-2992, 2004.

A. Villa and T. Watanabe, Production Management: Beyond the Dichotomy between 'Push' and 'Pull', Computer Integrated Manufacturing Systems, vol.6, issue.1, pp.53-63, 1993.

D. Wang and C. Xu, Hybrid Push Pull Production Control Strategy Simulation and its Applications, Production Planning & Control, vol.8, issue.2, pp.142-151, 1997.
DOI : 10.1080/095372897235406

D. C. Whybark and J. G. Williams, Material Requirements Planning under Uncertainty, Decision Sciences, vol.7, issue.4, pp.595-606, 1976.
DOI : 10.1111/j.1540-5915.1976.tb00704.x

O. Wight, Manufacturing Resource Planning: MRP II: Unlocking America's Productivity Potential, 1995.

J. M. Wilson, The Origin of Material Requirements Planning in Frederick W. Taylor's Planning Office, International Journal of Production Research, vol.54, issue.5, pp.1535-1553, 2016.

A. S. Xanthopoulos, D. E. Koulouriotis, and A. Gasteratos, Adaptive Card-based Production Control Policies, Computers & Industrial Engineering, vol.103, pp.131-144, 2017.
DOI : 10.1016/j.cie.2016.11.019

D. J. Van-der-zee, J. G. Van-der, and . Vorst, A Modeling Framework for Supply Chain Simulation: Opportunities for Improved Decision Making, Decision Sciences, vol.36, issue.1, pp.65-95, 2005.