Correlation between powder-packing properties and roll press compact heterogeneity, Powder Technology, vol.130, issue.1-3, pp.257-264, 2003. ,
DOI : 10.1016/S0032-5910(02)00202-4
Roll press design???influence of force feed systems on compaction, Powder Technology, vol.130, issue.1-3, pp.41-48, 2003. ,
DOI : 10.1016/S0032-5910(02)00223-1
The influence of granular vortex motion on the volumetric performance of enclosed screw conveyors, Powder Technology, vol.104, issue.1, pp.56-67, 1999. ,
DOI : 10.1016/S0032-5910(99)00039-X
Modified screw conveyor-mixers ??? Discrete element modeling approach, Advanced Powder Technology, vol.26, issue.5, pp.1391-1399, 2015. ,
DOI : 10.1016/j.apt.2015.07.016
DEM study of the flow of cohesive particles in a screw feeder, Powder Technology, vol.256, pp.529-539, 2014. ,
DOI : 10.1016/j.powtec.2014.01.062
Reprint of "Experiments and discrete element simulation of the dosing of cohesive powders in a simplified geometry", Powder Technology, vol.293, pp.69-81, 2016. ,
DOI : 10.1016/j.powtec.2015.07.052
Modelling the solids inflow and solids conveying of single-screw extruders using the discrete element method, Powder Technology, vol.153, issue.2, pp.95-107, 2005. ,
DOI : 10.1016/j.powtec.2005.03.001
A Rolling Theory for Granular Solids, Journal of Applied Mechanics, vol.32, issue.4, pp.842-848, 1965. ,
DOI : 10.1115/1.3627325
Practical application of roller compaction process modeling, Computers & Chemical Engineering, vol.34, issue.7, pp.1049-1057, 2010. ,
DOI : 10.1016/j.compchemeng.2010.03.004
Evaluating and Modifying Johanson's Rolling Model to Improve its Predictability, Journal of Pharmaceutical Sciences, vol.103, issue.7, pp.2062-2071, 2014. ,
DOI : 10.1002/jps.24012
Multiple sliced snapshots of the a) relative density and b) contact pressure values obtained by the combined DEM-FEM simulations at the minimum gap region between t = 2.00 s and t = 3.75 s. The two highlighted positions A and B are the positions where the values of Fig ,
Comparison of various modeling methods for analysis of powder compaction in roller press, Powder Technology, vol.130, issue.1-3, pp.265-271, 2003. ,
DOI : 10.1016/S0032-5910(02)00203-6
Experimental studies and modeling of the roller compaction of pharmaceutical powders, Strain, 2005. ,
Analysis of strain stress state in roller compaction process, Powder Technology, vol.208, issue.2, pp.417-422, 2011. ,
DOI : 10.1016/j.powtec.2010.08.037
URL : https://hal.archives-ouvertes.fr/hal-01768700
Modeling the powder roll compaction process: Comparison of 2-D finite element method and the rolling theory for granular solids (Johanson's model), Powder Technology, vol.221, pp.90-100, 2012. ,
DOI : 10.1016/j.powtec.2011.12.001
Validation of 3-D finite element analysis for predicting the density distribution of roll compacted pharmaceutical powder, Powder Technology, vol.237, pp.386-399, 2013. ,
DOI : 10.1016/j.powtec.2012.12.023
Effect of roll compactor sealing system designs: A finite element analysis, Powder Technology, vol.289, pp.21-30, 2016. ,
DOI : 10.1016/j.powtec.2015.11.039
URL : https://hal.archives-ouvertes.fr/hal-01609015
Experimental and numerical analyses of homogeneity over strip width in roll compaction, Powder Technology, vol.206, issue.1-2, pp.1-2 ,
DOI : 10.1016/j.powtec.2010.04.030
URL : https://hal.archives-ouvertes.fr/hal-01680751
Understanding variation in roller compaction through finite element-based process modeling, Computers & Chemical Engineering, vol.34, issue.7, pp.1058-1071, 2010. ,
DOI : 10.1016/j.compchemeng.2010.04.008
Modifications to Johanson's roll compaction model for improved relative density predictions, Powder Technology, vol.297, pp.294-302, 2016. ,
DOI : 10.1016/j.powtec.2016.04.017
Material properties and compressibility using Heckel and Kawakita equation with commonly used pharmaceutical excipients, J. Pharm. Investig, vol.40, issue.4, pp.237-244, 2010. ,
Indices of tableting performance, Powder Technol, pp.145-1590032, 1984. ,
A discrete numerical model for granular assemblies, G??otechnique, vol.29, issue.1, pp.47-65, 1979. ,
DOI : 10.1680/geot.1979.29.1.47
A discrete numerical model for granular assemblies, J. Reine Angew. Phys, pp.92-1882 ,
Model for collisions in granular gases, Physical Review E, vol.34, issue.5, 1996. ,
DOI : 10.1016/0021-9991(80)90104-7
Direct Observation of Medium-Range Crystalline Order in Granular Liquids Near the Glass Transition, Physical Review Letters, vol.100, issue.15, 2008. ,
DOI : 10.1038/320340a0
Polydispersity and structure: a qualitative comparison between simulations and granular systems data, Rev. Mex. Fis, pp.60-136, 2014. ,
Numerical investigation of the angle of repose of monosized spheres, Physical Review E, vol.11, issue.2, 2001. ,
DOI : 10.1007/s100510051189
The Poisson's ratio of microcrystalline cellulose, International Journal of Pharmaceutics, vol.105, issue.2, pp.177-180, 1994. ,
DOI : 10.1016/0378-5173(94)90463-4
Micro-scale measurement of the mechanical properties of compressed pharmaceutical powders. 1: The elasticity and fracture behavior of microcrystalline cellulose, International Journal of Pharmaceutics, vol.209, issue.1-2, pp.27-35, 2000. ,
DOI : 10.1016/S0378-5173(00)00541-X
Young???s modulus of a 2.25Cr???1Mo steel at elevated temperature, Scripta Materialia, vol.51, issue.7, pp.635-639, 2004. ,
DOI : 10.1016/j.scriptamat.2004.06.028
Stainless???steel elastic constants at low temperatures, Journal of Applied Physics, vol.52, issue.3, pp.1587-1590, 1981. ,
DOI : 10.1016/0375-9601(79)90525-5
Models, algorithms and validation for opensource DEM and CFD-DEM, Progress in Computational Fluid Dynamics, An International Journal, vol.12, issue.2/3, pp.140-152, 2012. ,
DOI : 10.1504/PCFD.2012.047457
, P.U. Dassault Systems, ABAQUS Documentation, 2014.
Contact in a multi-material Eulerian finite element formulation, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.39-41, pp.4277-4298, 2004. ,
DOI : 10.1016/j.cma.2003.12.061
Applied Soil Mechanics With ABAQUS, 2007. ,
A modified Drucker-Prager Cap model for die compaction simulation of pharmaceutical powders, International Journal of Solids and Structures, vol.45, issue.10, pp.3088-3106, 2008. ,
DOI : 10.1016/j.ijsolstr.2008.01.024
Stress, stress asymmetry and couple stress: from discrete particles to continuous fields, Granular Matter, vol.435, issue.7039, pp.239-252, 2010. ,
DOI : 10.1007/978-1-4612-1039-9
Closure relations for shallow granular flows from particle simulations, Granular Matter, vol.177, issue.3, pp.531-552, 2012. ,
DOI : 10.1016/j.jvolgeores.2008.01.045
A numerical approach to the testing of the fission hypothesis, The Astronomical Journal, vol.82, pp.1013-1024, 1977. ,
DOI : 10.1086/112164
Coarse-grained local and objective continuum description of three-dimensional granular flows down an inclined surface, Physics of Fluids, vol.25, issue.7 ,
DOI : 10.1063/1.4810746
Measurement of powder flow in a screw feeder by x-ray penetration image analysis, Measurement Science and Technology, vol.17, issue.2, pp.419-4260957, 2006. ,
DOI : 10.1088/0957-0233/17/2/025
Cubic convolution interpolation for digital image processing, IEEE Transactions on Acoustics, Speech, and Signal Processing, vol.29, issue.6, pp.1153-1160, 1981. ,
DOI : 10.1109/TASSP.1981.1163711
Comparison of Interpolating Methods for Image Resampling, IEEE Transactions on Medical Imaging, vol.2, issue.1, pp.31-39, 1983. ,
DOI : 10.1109/TMI.1983.4307610