S. Bremen, W. Meiners, and A. Diatlov, Selective laser melting, a manufacturing technology for the future, Laser Technik J, vol.9, issue.2, pp.33-38, 2012.

J. Kruth, G. Levy, F. Klocke, and T. H. Childs, Consolidation phenomena in laser and powder-bed based layered manufacturing, CIRP Ann. Manuf. Technol, vol.56, issue.2, pp.730-759, 2007.

M. Mani, B. Lane, A. Donmez, S. Feng, S. Moylan et al., Measurement Science Needs for Real-Time Control of Additive Manufacturing Powder Bed Fusion Processes, NISTIR, p.8036, 2015.

S. Leuders, M. Thöne, A. Riemer, T. Niendorf, T. Tröster et al., On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance, Int. J. Fatigue, vol.48, pp.300-307, 2013.

L. C. Zhang and H. Attar, Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review, Adv. Eng. Mater, vol.18, issue.4, pp.463-475, 2016.

Y. J. Liu, S. J. Li, H. L. Wang, W. T. Hou, Y. L. Hao et al., Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting, Acta Mater, vol.113, pp.56-67, 2016.

M. Simonelli, Y. Y. Tse, and C. Tuck, Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6Al-4V, Mater. Sci. Eng. A, vol.616, pp.1-11, 2014.

A. Townsend, N. Senin, L. Blunt, R. K. Leach, and J. S. Taylor, Surface texture metrology for metal additive manufacturing: a review, Prec. Eng, vol.46, pp.34-47, 2016.

P. Mercelis and J. P. Kruth, Residual stresses in selective laser sintering and selective laser melting, Rapid Prototyp, J, vol.12, issue.5, pp.254-265, 2006.

C. R. Knowles, T. H. Becker, and R. B. Tait, Residual stress measurements and structural integrity implications for selective laser melted Ti-6Al-4V, S. Afr. J. Ind. Eng, vol.23, issue.3, pp.119-129, 2012.

A. S. Astm, Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium With Powder Bed Fusion, ASTM Standards, 10.04, pp.2924-2938, 2014.

N. Keller, F. Neugebauer, H. Xu, and V. Ploshikhin, Thermo-mechanical simulation of additive layer manufacturing of titanium aerospace structures, Proc. DGM Int. Congr. Light Mater, 2013.

C. Li, J. F. Liu, Y. B. Guo, and Z. Y. Li, Efficient multiscale prediction of cantilever distortion by selective laser melting, Proc. 27th Annual International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference, pp.236-246, 2016.

N. S. Rossini, M. Dassisti, K. Y. Benyounis, and A. G. Olabi, Methods of measuring residual stresses in components, Mater. & Des, vol.35, pp.572-588, 2012.

J. P. Kruth, J. Deckers, E. Yasa, and R. Wauthlé, Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method, Proc. Inst. Mech. Eng. Part. B: J. Eng. Manuf, vol.226, issue.6, pp.980-991, 2012.

B. Cheng, S. Shrestha, and K. Chou, Stress and deformation evaluations of scanning strategy effect in selective laser melting, Addit. Manuf, vol.12, pp.240-251, 2016.

P. J. Withers, Residual stress and its role in failure, Rep. Prog. Phys, vol.70, issue.12, p.2211, 2007.

R. H. Leggatt, Residual stresses in welded structures, Int. J. Press. Vessel. Pip, vol.85, issue.3, pp.144-151, 2008.

K. Masubuchi, Analysis of Welded Structures: Residual Stresses, Distortion, and Their Consequences, vol.33, 2013.

M. Kleiner, R. Krux, and W. Homberg, Analysis of residual stresses in high-pressure sheet metal forming, CIRP Ann. Manuf. Technol, vol.53, issue.1, pp.211-214, 2004.

B. R. Sridhar, G. Devananda, K. Ramachandra, and R. Bhat, Effect of machining parameters and heat treatment on the residual stress distribution in titanium alloy IMI834, J. Mater. Process. Technol, vol.139, issue.1, pp.628-634, 2003.

P. J. Withers and H. K. Bhadeshia, Residual stress. Part 1-measurement techniques, Mater. Sci. Technol, vol.17, issue.4, pp.355-365, 2001.

F. A. Kandil, J. D. Lord, A. T. Fry, and P. V. Grant, A Review of Residual Stress Measurement Methods, A Guide to Technique Selection, NPL, p.4, 2001.

X. Wang and K. Chou, Residual stress in metal parts produced by powder-bed additive manufacturing processes, Proc. 26th Annual International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference, pp.1463-1474, 2015.

K. Moussaoui, S. Segonds, W. Rubio, and M. Mousseigne, Studying the measurement by x-ray diffraction of residual stresses in Ti6Al4V titanium alloy, Mater. Sci. Eng. A, vol.667, pp.340-348, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01950787

N. Dai, L. C. Zhang, J. Zhang, X. Zhang, Q. Ni et al., Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes, Corr. Sci, vol.111, pp.703-710, 2016.

M. Larsson, P. Hedenqvist, and S. Hogmark, Deflection measurements as method to determine residual stress in thin hard coatings on tool materials, Surf. Eng, vol.12, issue.1, pp.43-48, 1996.

J. P. Kruth, L. Froyen, J. Van-vaerenbergh, P. Mercelis, M. Rombouts et al., Selective laser melting of iron-based powder, J. Mater. Process. Technol, vol.149, issue.1, pp.616-622, 2004.

M. F. Zaeh and G. Branner, Investigations on residual stresses and deformations in selective laser melting, Prod. Eng, vol.4, issue.1, pp.35-45, 2010.

D. Buchbinder, W. Meiners, N. Pirch, K. Wissenbach, and J. Schrage, Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting, J. Laser Appl, vol.26, issue.1, p.12004, 2014.

L. Papadakis, A. Loizou, J. Risse, and J. Schrage, Numerical computation of component shape distortion manufactured by selective laser melting, Procedia CIRP, vol.18, pp.90-95, 2014.

I. Yadroitsava, S. Grewar, D. Hattingh, and I. Yadroitsev, Residual stress in SLM Ti6Al4V alloy specimens, Mater. Sci. Forum, vol.828, pp.305-310, 2015.

G. Tapia and A. Elwany, A review on process monitoring and control in metal-based additive manufacturing, J. Manuf. Sci. Eng, vol.136, p.60801, 2014.

S. K. Everton, M. Hirsch, P. Stravroulakis, R. K. Leach, and A. T. Clare, Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing, Mater. Des, vol.95, pp.431-445, 2016.

E. R. Denlinger, J. C. Heigel, P. Michaleris, and T. A. Palmer, Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys, J. Mater. Process. Technol, vol.215, pp.123-131, 2015.

J. Cohen-sabban, J. Gaillard-groleas, and P. J. Crepin, Quasi-confocal extended field surface sensing, Proc. SPIE 4449, Optical Metrology Roadmap for the Semiconductor, Optical, and Data Storage Industries II, vol.178, pp.178-183, 2001.

R. Danzl, F. Helmli, and S. Scherer, Focus variation-a robust technology for high resolution optical 3D surface metrology, Strojni?ki vestnik-J, Mech. Eng, vol.57, issue.3, pp.245-256, 2011.

, Geometrical Product Specifications, (GPS)-flatness-part 1: vocabulary and parameters of flatness, International Organization for Standardization, pp.12781-12782, 2011.

K. Nadolny and W. Kap?onek, Analysis of flatness deviations for austenitic stainless steel workpieces after efficient surface machining, Meas. Sci. Rev, vol.14, issue.4, pp.204-212, 2014.

A. Roberts, Curvature attributes and their application to 3D interpreted horizons, First Break, vol.19, issue.2, pp.85-100, 2001.
DOI : 10.1046/j.0263-5046.2001.00142.x

K. Rektorys and D. Geometry, Survey of Applicable Mathematics, Iliffe Books Ltd, pp.298-373, 1969.

R. Leach, Metrology for additive manufacturing, Meas. Control, vol.49, issue.4, pp.132-135, 2016.
DOI : 10.1177/0020294016644479

URL : http://journals.sagepub.com/doi/pdf/10.1177/0020294016644479

B. E. Iso_4287 and B. S. En-iso_4287, Geometrical Product Specification (GPS) Surface Texture: Profile Method Terms, Definitions and Surface Texture Parameters, 2000.

B. E. Iso_4288 and B. S. En-iso_4288, Geometric Product Specification (GPS) Surface Texture Profile Method: Rules and Procedures for the Assessment of Surface Texture, 1998.

L. Parry, I. A. Ashcroft, and R. D. Wildman, Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation, Addit. Manuf, vol.12, pp.1-15, 2016.

N. Keller and V. Ploshikhin, New method for fast predictions of residual stress and distortion of AM parts, Proc. 25th Annual International Solid Freeform Fabrication Symposium, pp.1229-1237, 2006.