A. Guidara, K. Chaari, and J. Bouaziz, Elaboration and Characterization of Alumina-Fluorapatite Composites, J. Biomater. Nanobiotechnol, vol.2, pp.103-113, 2011.

S. Martin, Contribution à la modélisation du frittage en phase solide, 2014.

A. Singh, S. Dash, M. Kamruddin, P. K. Ajikumar, A. K. Tyagi et al., Formation of Nanocrystalline Calcia by the Decomposition of Calcite

, J. Am. Ceram. Soc, vol.85, issue.4, pp.927-932, 2002.

D. Bouvard and R. M. Mcmeeking, Deformation of Interparticle Necks by Diffusion-Controlled Creep

, J. Am. Ceram. Soc, vol.79, issue.3, pp.666-672, 1996.

C. Nachiappan, L. Rangaraj, C. Divakar, and V. Jayaram, Synthesis and Densification of Monolithic Zirconium Carbide by Reactive Hot Pressing, J. Am. Ceram. Soc, vol.93, pp.1341-1346, 2010.

Y. Dong, J. Zhou, B. Lin, Y. Wang, S. Wang et al., Reaction-Sintered Porous Mineral-Based Mullite Ceramic Membrane Supports Made from Recycled Materials, J. Hazard. Mater, vol.172, pp.181-186, 2009.

S. M. Naga, S. H. Kenawy, M. Awaad, H. S. El-wahab, P. Greil et al., Synthesis and Characterization of Laminated Si/SiC Composites, J. Adv. Res, vol.4, pp.75-82, 2013.

B. Sarbandi, Finite Element Simulation of Ceramic Deformation During Sintering, 2011.
URL : https://hal.archives-ouvertes.fr/tel-01085057

O. Ertugrul, R. Dalmis, S. Akpinar, I. M. Kusoglu, and E. Celik, Influence of Zircon Particle Size on Conventional and Microwave Assisted Reaction Sintering of In-Situ Mullite-Zirconia Composites, Ceram. Int, vol.46, pp.11104-11117, 2016.

G. Ocampo, J. I. Sierra, D. M. Orozco, and C. P. , Porous Bodies of Hydroxyapatite Produced by a Combination of the Gel-Casting and Polymer Sponge Methods, J. Adv. Res, vol.7, pp.297-304, 2016.

J. Croquesel, D. Bouvard, J. M. Chaix, C. P. Carry, S. Saunier et al., Direct Microwave Sintering of Pure Alumina in a Single Mode Cavity: Grain Size and Phase Transformation Effects, Acta Mater, vol.116, pp.53-62, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01446360

Y. Kim, E. P. Kim, J. W. Noh, S. H. Lee, Y. S. Kwon et al., Fabrication and Mechanical Properties of Powder Metallurgy Tantalum Prepared by Hot Isostatic Pressing, Int. J. Refract. Hard Met, vol.48, pp.211-216, 2015.

L. Chrétien, L. Bonnet, R. Boulesteix, A. Maître, C. Sallé et al., Influence of Hot Isostatic Pressing on Sintering Trajectory and Optical Properties of Transparent Nd: YAG Ceramics, J. Eur. Ceram. Soc, vol.36, issue.8, pp.2035-2042, 2016.

I. Hilger, X. Boulnat, J. Hoffmann, C. Testani, F. Bergner et al., Ulbricht, A. Fabrication and Characterization of Oxide Dispersion Strengthened (ODS) 14 Cr Steels Consolidated by Means of Hot Isostatic Pressing, Hot Extrusion and Spark Plasma Sintering, J. Nucl. Mater, vol.472, pp.206-214, 2016.

B. Huang, B. He, Y. Xiao, R. Ang, J. Yang et al., Microstructure and Bubble Formation of Al-K-Si Doped Tungsten Prepared by Spark Plasma Sintering, Int. J. Refract. Hard Met, vol.54, pp.335-341, 2016.

Y. H. Huang, Y. J. Wu, W. J. Qiu, J. Li, and X. M. Chen, Enhanced Energy Storage Density of Ba0.4Sr0.6TiO3MgO Composite Prepared by Spark Plasma Sintering

, J. Eur. Ceram. Soc, vol.35, issue.5, pp.1469-1476, 2015.

Y. Khalil, A. Kowalski, and N. Hopkinson, Influence of Energy Density on Flexural Properties of Laser-Sintered UHMWPE. Addit. Manuf, vol.10, pp.67-75, 2016.

P. Mengucci, G. Barucca, A. Gatto, E. Bassoli, L. Denti et al., Czyrska-Filemonowicz, A. Effects of Thermal Treatments on Microstructure and Mechanical Properties of a Co-Cr-Mo-W Biomedical Alloy Produced by Laser Sintering, J. Mech. Behav. Biomed. Mater, vol.60, pp.106-117, 2016.

M. M. Sanad, M. M. Rashad, E. A. Abdel-aal, and M. F. El-shahat, Morphological and Dielectric Properties of Sintered Mullite Ceramics at Two Different Heating Rates Prepared from Alkaline Monophasic Salts, Ceram. Int, vol.39, pp.1547-1554, 2013.

H. Shang, A. Mohanram, and R. K. Bordia, Densification and Microstructural Evolution of Hierarchically Porous Ceramics During Sintering, J. Am. Ceram. Soc, vol.98, issue.11, pp.3424-3430, 2015.

Y. Zou and J. Malzbender, Development and Optimization of Porosity Measurement Techniques, Ceram. Int, vol.42, pp.2861-2870, 2016.

C. Falamaki, M. S. Afarani, and A. Aghaie, Initial Sintering Stage Pore Growth Mechanism Applied to the Manufacture of Ceramic Membrane Supports, J. Eur. Ceram. Soc, vol.24, pp.2285-2292, 2004.

J. Baber, A. Klimera, and F. Raether, Situ Measurement of Dimensional Changes and Temperature Fields During Sintering with a Novel Thermooptical Measuring Device, J. Eur. Ceram. Soc, vol.27, pp.701-705, 2007.

S. Marinel and E. Savary, Situ Measurement of the Shrinkage During Microwave Sintering, J. Mater. Process. Technol, vol.209, issue.10, pp.4784-4788, 2009.

S. Marinel, E. Savary, and M. Gomina, Sintering of CuO and ZnO in a Single Mode Microwave Cavity with Shrinkage Control, J. Microwave Power Electromagn. Energy, vol.44, issue.1, pp.57-63, 2010.

D. Zymelka, S. Saunier, J. Molimard, and D. Goeuriot, Continuous and Contactless Method of Measuring Shrinkage and Temperature Distribution During Microwave Sintering, Proceedings of Advances in Modeling of Microwave Sintering, 12th Seminar Computer Modeling in Microwave Engineering & Applications, pp.38-42, 2010.

H. Chemani, Corrélation entre microstructure, processus de division, propriétés physiques dimensionnelles et surfaciques des poudres SnO 2 élaborés par voie chimique en vue de leurs applications dans des domaines diversifiés, 2007.

D. Zymelka, Suivi par méthode optique du frittage micro-ondes d'oxydes céramiques, 2012.

G. Chen, K. D. Liss, and P. Cao, An In-Situ Study of Sintering Behavior and Phase Transformation Kinetics in NiTi Using Neutron Diffraction, Metall. Mater. Trans. A, vol.46, pp.5887-5899, 2015.

Z. Xu, M. A. Hodgson, and P. Cao, A Comparative Study of Powder Metallurgical (PM) and Wrought Fe-Mn-Si Alloys, Mater. Sci. Eng. A, vol.630, pp.116-124, 2015.

J. Frenkel, Viscous Flow of Crystalline Bodies Under the Action of Surface Tension, J. Phys, vol.9, pp.385-391, 1945.

C. Herring, Effect of Change of Scale on Sintering Phenomena, J. Appl. Phys, vol.21, pp.301-303, 1950.

R. L. Coble, Diffusion Models for Hot Pressing with Surface Energy and Pressure Effects as Driving Forces, J. Appl. Phys, vol.41, pp.4798-4807, 1970.

E. A. Holm and C. C. Battaile, The Computer Simulation of Microstructural Evolution, J. Miner. Met. Mater. Soc. Overview Comput. Mater, vol.53, issue.9, pp.20-23, 2001.

E. A. Olevsky, Theory of Sintering: From Discrete to Continuum, Mater. Sci. Eng, vol.23, pp.41-100, 1988.

R. K. Bordia and G. W. Scherer, On Constrained Sintering I, Constitutive Model for a Sintering Body, Acta Metall, vol.36, pp.2393-2397, 1988.

H. R. Kraft, Numerical Simulation of Solid State Sintering; Model and Application, J. Eur. Ceram. Soc, vol.24, pp.345-361, 2004.

H. Ou, M. Sahli, J. C. Gelin, and T. Barrière, Experimental Analysis and Finite Element Simulation of the

, Sintering of Bi-Material Components, Powder Technol, vol.268, pp.269-278, 2014.

K. Maca, V. Pouchly, and A. R. Boccaccini, Sintering Densification Curve-A Practical Approach for its Construction from Dilatometric Shrinkage Data, Sci. Sintering, vol.40, pp.117-122, 2008.

G. Maizza, S. Grasso, Y. Sakka, T. Noda, and O. Ohashi, Relation between Microstructure, Properties and Spark Plasma Sintering (SPS) Parameters of Pure Ultrafine WC Powder, Sci. Technol. Adv. Mater, vol.8, pp.644-654, 2007.

G. Maizza, S. Grasso, and Y. Sakka, Moving Finite-Element Mesh Model for Aiding Spark Plasma Sintering in Current Control Mode of Pure Ultrafine WC Powder, Mater. Sci, vol.44, pp.1219-1236, 2007.

W. Li, M. M. Porter, E. A. Olevsky, R. M. German, and J. Mckittrick, Sintering of Bi-Porous Titanium Dioxide Scaffolds: Experimentation, Modeling and Simulation, Mater. Sci. Eng. A, vol.636, pp.148-156, 2015.

X. Wei, C. Back, O. Izhvanov, O. L. Khasanov, C. D. Haines et al., Spark Plasma Sintering of Commercial Zirconium Carbide Powders: Densification Behavior and Mechanical Properties, Materials, vol.8, pp.6043-6061, 2015.

J. Madiouli, D. Lecomte, T. Nganya, S. Chavez, J. Sghaier et al., A Method for Determination of Porosity Change from Shrinkage Curves of Deformable Materials. Drying Technol, vol.25, pp.621-628, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01925866

J. Qiu, S. Khalloufi, A. Martynenko, G. Van-dalen, M. Schutyser et al., Bulk Density, and Volume Reduction During Drying: Review of Measurement Methods and Coefficient Determinations. Drying Technol, vol.33, pp.1681-1699, 2015.

D. Wang and A. Martynenko, Estimation of Total, Openand Close-pore Porosity of Apple Slices During Drying. Drying Technol, vol.34, pp.892-899, 2015.

W. Noor-aidawati, W. Nadhari, R. Hashim, M. Danish, O. Sulaiman et al., A Model of Drying Kinetics of Acacia mangium Wood at Different Temperatures. Drying Technol, vol.32, pp.361-370, 2014.

A. Martynenko and . True, Particle and Bulk Density of Shrinkable Biomaterials: Evaluation from Drying Experiments. Drying Technol, vol.32, pp.1319-1325, 2014.

T. Tsuruta, H. Tanigawa, and H. Sashi, Study on Shrinkage Deformation of Food in Microwave Vacuum Drying. Drying Technol, vol.33, pp.1830-1836, 2015.