H. Benhabiles, G. Lavoué, J. Vandeborre, and M. Daoudi, Learning Boundary Edges for 3D-Mesh Segmentation, Computer Graphics Forum, vol.26, issue.5, pp.2170-2182, 2011.
DOI : 10.1016/S0097-8493(02)00128-0

URL : https://hal.archives-ouvertes.fr/hal-00660740

P. J. Besl and R. C. Jain, Segmentation through variableorder surface fitting. Pattern Analysis and Machine Intelligence, IEEE Transactions on, vol.10, issue.2, pp.167-192, 1988.
DOI : 10.1109/34.3881

URL : http://www.hunter.cuny.edu/cs/Faculty/Stamos/3DP_F03/PAPERS/SEGMENTATION/besl_jain.pdf

B. Bhanu, S. Lee, C. Ho, and T. Henderson, Range data processing: Representation of surfaces by edges, 1985.

V. Borsu, A. Yogeswaran, and P. Payeur, Automated surface deformations detection and marking on automotive body panels, 2010 IEEE International Conference on Automation Science and Engineering, pp.551-556, 2010.
DOI : 10.1109/COASE.2010.5584643

G. Bradski, Dr. Dobb's Journal of Software Tools 6. Carlbom, I., Paciorek, J.: Planar geometric projections and viewing transformations, ACM Computing Surveys (CSUR), vol.10, issue.4, pp.465-502, 1978.

H. Deng, W. Zhang, E. Mortensen, T. Dietterich, and L. Shapiro, Principal Curvature-Based Region Detector for Object Recognition, 2007 IEEE Conference on Computer Vision and Pattern Recognition, p.18, 2007.
DOI : 10.1109/CVPR.2007.382972

URL : http://www.cs.washington.edu/homes/shapiro/cvpr07final.pdf

T. K. Dey, G. Li, and J. Sun, Normal estimation for point clouds: a comparison study for a Voronoi based method, Proceedings Eurographics/IEEE VGTC Symposium Point-Based Graphics, 2005., pp.39-46, 2005.
DOI : 10.1109/PBG.2005.194062

D. Dimitrov, C. Knauer, K. Kriegel, and G. Rote, On the bounding boxes obtained by principal component analysis, 22nd European Workshop on Computational Geometry, pp.193-196, 2006.

N. Dyn, K. Hormann, S. Kim, and D. Levin, Optimizing 3d triangulations using discrete curvature analysis, Mathematical methods for curves and surfaces, vol.28, issue.5, pp.135-146, 2001.

S. Filin, Surface clustering from airborne laser scanning data. International Archives of Photogrammetry Remote Sensing and Spatial, Information Sciences, vol.34, issue.3, pp.119-124, 2002.
DOI : 10.1016/j.cageo.2004.07.009

P. Fua and P. Sander, Segmenting unstructured 3D points into surfaces, Computer Vision -ECCV'92, pp.676-680, 1992.
DOI : 10.1007/3-540-55426-2_73

A. Golovinskiy and T. Funkhouser, Randomized cuts for 3d mesh analysis, ACM transactions on graphics (TOG), vol.27, issue.5, p.145, 2008.
DOI : 10.1145/1457515.1409098

URL : http://www.cs.jhu.edu/~misha/ReadingSeminar/Papers/Golovinskiy08.pdf

R. C. Gonzalez and R. E. Woods, Digital image processing, pp.669-671, 2002.

R. C. Gonzalez and R. E. Woods, Digital image processing, pp.667-669, 2002.

R. C. Gonzalez and R. E. Woods, Digital image processing, pp.655-657, 2002.

S. Gottschalk, M. C. Lin, and D. Manocha, OBBTree, Proceedings of the 23rd annual conference on Computer graphics and interactive techniques , SIGGRAPH '96, pp.171-180, 1996.
DOI : 10.1145/237170.237244

N. A. Haddad, From ground surveying to 3D laser scanner: A review of techniques used for spatial documentation of historic sites, Journal of King Saud University - Engineering Sciences, vol.23, issue.2, pp.109-118, 2011.
DOI : 10.1016/j.jksues.2011.03.001

A. Hoover, G. Jeanbaptiste, X. Jiang, P. J. Flynn, H. Bunke et al., An experimental comparison of range image segmentation algorithms. Pattern Analysis and Machine Intelligence, IEEE Transactions on, vol.18, issue.7, pp.673-689, 1996.

H. Jin, A. J. Yezzi, and S. Soatto, Region-Based Segmentation on Evolving Surfaces with Application to 3D Reconstruction of Shape and Piecewise Constant Radiance, pp.114-125, 2004.
DOI : 10.1007/978-3-540-24671-8_9

I. Jolli?e, Principal component analysis, 2002.

S. Katz and A. Tal, Hierarchical mesh decomposition using fuzzy clustering and cuts, 2003.
DOI : 10.1145/1201775.882369

W. Khan, Image Segmentation Techniques: A Survey, Journal of Image and Graphics, vol.1, issue.4, pp.166-170, 2013.
DOI : 10.12720/joig.1.4.166-170

K. Klasing, D. Altho?, D. Wollherr, and M. Buss, Comparison of surface normal estimation methods for range sensing applications, 2009 IEEE International Conference on Robotics and Automation, pp.3206-3211, 2009.
DOI : 10.1109/ROBOT.2009.5152493

J. J. Koenderink and A. J. Van-doorn, Surface shape and curvature scales, Image and Vision Computing, vol.10, issue.8, pp.557-564, 1992.
DOI : 10.1016/0262-8856(92)90076-F

K. Köster and M. Spann, Mir: an approach to robust clustering-application to range image segmentation. Pattern Analysis and Machine Intelligence, IEEE Transactions on, vol.22, issue.5, pp.430-444, 2000.

P. Lancaster and K. Salkauskas, Surfaces generated by moving least squares methods, Mathematics of Computation, vol.37, issue.155, pp.141-158, 1981.
DOI : 10.1090/S0025-5718-1981-0616367-1

URL : http://www.ams.org/mcom/1981-37-155/S0025-5718-1981-0616367-1/S0025-5718-1981-0616367-1.pdf

D. Levin, The approximation power of moving least-squares, Mathematics of Computation, vol.67, issue.224, pp.1517-1531, 1998.
DOI : 10.1090/S0025-5718-98-00974-0

D. Levin, Mesh-Independent Surface Interpolation, pp.37-49, 2004.
DOI : 10.1007/978-3-662-07443-5_3

R. Marani, G. Roselli, M. Nitti, G. Cicirelli, T. Orazio et al., A 3D vision system for high resolution surface reconstruction, 2013 Seventh International Conference on Sensing Technology (ICST), pp.157-162, 2013.
DOI : 10.1109/ICSensT.2013.6727634

N. J. Mitra and A. Nguyen, Estimating surface normals in noisy point cloud data, Proceedings of the nineteenth annual symposium on Computational geometry, pp.322-328, 2003.
DOI : 10.1145/777837.777840

R. Mumtaz, M. Mumtaz, A. B. Mansoor, and H. Masood, Computer aided visual inspection of aircraft surfaces, International Journal of Image Processing (IJIP), vol.6, issue.1, p.38, 2012.

A. Nealen, An as-short-as-possible introduction to the least squares, weighted least squares and moving least squares methods for scattered data approximation and interpolation, p.150, 2004.

A. Nguyen and B. Le, 3D point cloud segmentation: A survey, 2013 6th IEEE Conference on Robotics, Automation and Mechatronics (RAM), pp.225-230, 2013.
DOI : 10.1109/RAM.2013.6758588

A. Nurunnabi, D. Belton, and G. West, Robust Segmentation in Laser Scanning 3D Point Cloud Data, 2012 International Conference on Digital Image Computing Techniques and Applications (DICTA), p.18, 2012.
DOI : 10.1109/DICTA.2012.6411672

A. Nurunnabi, G. West, and D. Belton, Robust methods for feature extraction from mobile laser scanning 3d point clouds

F. Pauling, M. Bosse, and R. Zlot, Automatic segmentation of 3d laser point clouds by ellipsoidal region growing, Australasian Conference on Robotics and Automation (ACRA), 2009.

M. Pauly, M. Gross, and L. P. Kobbelt, Ecient simplification of point-sampled surfaces, Proceedings of the conference on Visualization'02, pp.163-170, 2002.

J. Peng, Q. Li, C. J. Kuo, and M. Zhou, Estimating Gaussian curvatures from 3D meshes, Human Vision and Electronic Imaging VIII, pp.270-280, 2003.
DOI : 10.1117/12.473938

T. Rabbani, F. Van-den-heuvel, and G. Vosselmann, Segmentation of point clouds using smoothness constraint. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, vol.36, issue.5, pp.248-253, 2006.

R. B. Rusu, Semantic 3D Object Maps for Everyday Manipulation in Human Living Environments, KI - K??nstliche Intelligenz, vol.24, issue.4, 2009.
DOI : 10.1007/s13218-010-0059-6

R. B. Rusu and S. Cousins, 3D is here: Point Cloud Library (PCL), 2011 IEEE International Conference on Robotics and Automation, 2011.
DOI : 10.1109/ICRA.2011.5980567

URL : http://www.pointclouds.org/assets/pdf/pcl_icra2011.pdf

R. B. Rusu, Z. C. Marton, N. Blodow, M. Dolha, and M. Beetz, Towards 3D Point cloud based object maps for household environments, Robotics and Autonomous Systems, vol.56, issue.11, pp.927-941, 2008.
DOI : 10.1016/j.robot.2008.08.005

A. D. Sappa and M. Devy, Fast range image segmentation by an edge detection strategy, Proceedings Third International Conference on 3-D Digital Imaging and Modeling, pp.292-299, 2001.
DOI : 10.1109/IM.2001.924460

R. Schnabel, R. Wahl, and R. Klein, Efficient RANSAC for Point-Cloud Shape Detection, Computer Graphics Forum, vol.57, issue.2, pp.214-226, 2007.
DOI : 10.1016/S0010-4485(96)00054-1

URL : http://cg.informatik.uni-bonn.de/docs/publications/2007/schnabel-2007-efficient.pdf

C. Seher, M. Siegel, and W. M. Kaufman, Automation tools for nondestructive inspection of aircraft: Promise of technology transfer from the civilian to the military sector, Fourth Annual IEEE DualUse Technologies and Applications Conference, 1994.

C. M. Shakarji, Least-squares fitting algorithms of the NIST algorithm testing system, Journal of Research of the National Institute of Standards and Technology, vol.103, issue.6, pp.633-641, 1998.
DOI : 10.6028/jres.103.043

M. Siegel and P. Gunatilake, Remote inspection technologies for aircraft skin inspection, Proceedings of the 1997 IEEE Workshop on Emergent Technologies and Virtual Systems for Instrumentation and Measurement, pp.79-78, 1997.

M. Siegel, P. Gunatilake, and G. Podnar, Robotic assistants for aircraft inspectors, Industrial Robot: An International Journal, vol.25, issue.6, pp.389-400, 1998.
DOI : 10.1016/0921-8890(93)90023-6

P. Simari, D. Nowrouzezahrai, E. Kalogerakis, and K. Singh, Multi-objective shape segmentation and labeling, Computer Graphics Forum, vol.26, issue.5, pp.1415-1425, 2009.
DOI : 10.1080/16864360.2007.10738492

URL : http://www.dgp.toronto.edu/~kalo/papers/more/multiobjectivesegmentation_sgp.pdf

J. Strom, A. Richardson, and E. Olson, Graph-based segmentation for colored 3D laser point clouds, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.2131-2136, 2010.
DOI : 10.1109/IROS.2010.5650459

URL : http://april.eecs.umich.edu/pdfs/strom2010.pdf

P. Tang, B. Akinci, and D. Huber, Characterization of three algorithms for detecting surface flatness defects from dense point clouds, IS&T/SPIE Electronic Imaging390N. International Society for Optics and Photonics, pp.390-72, 2009.

D. Tóvári and N. Pfeifer, Segmentation based robust interpolation -a new approach to laser data filtering. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, vol.36, issue.3, pp.79-84, 2005.

C. Wang, X. Wang, X. Zhou, and Z. Li, The Aircraft Skin Crack Inspection Based on Different-Source Sensors and Support Vector Machines, Journal of Nondestructive Evaluation, vol.56, issue.4, pp.46-10921, 2016.
DOI : 10.1109/CINTI.2010.5672224

H. Wendland, Piecewise polynomial, positive definite and compactly supported radial functions of minimal degree, Advances in Computational Mathematics, vol.4, issue.1, pp.389-396, 1995.
DOI : 10.1007/BF02123482

O. Wirjadi, Survey of 3D image segmentation methods, ITWM, vol.35, 2007.

B. S. Wong, X. Wang, C. M. Koh, C. G. Tui, C. Tan et al., Crack detection using image processing techniques for radiographic inspection of aircraft wing spar, Insight - Non-Destructive Testing and Condition Monitoring, vol.53, issue.10, pp.552-556, 2011.
DOI : 10.1784/insi.2011.53.10.552

J. Yang, Z. Gan, K. Li, and C. Hou, Graph-Based Segmentation for RGB-D Data Using 3-D Geometry Enhanced Superpixels, IEEE Transactions on Cybernetics, vol.45, issue.5, pp.927-940, 2015.
DOI : 10.1109/TCYB.2014.2340032