W. A. Alkayat and A. M. Gerrard, Estimating manning levels for process plants. AACE transactions. I.2.1-I.2, 1984.

P. Arlabosse, Etude des procédés de séchage des boues urbaines et industrielles, Ecole des Mines d'Albi Carmaux & Association RE, CO.R.D, p.184, 2001.

J. Boatella-riera, R. Codony, M. Rafecas, and F. Guardioal, Recycled cooking oils: Assessments of risk for public health, p.100, 2000.

D. F. Bress, B. S. Greenfield, and R. T. Haug, Energy from sludge derived fuels: The Hyperion Energy Recovery System, Energy from biomass waste X. Institute of Gas technology, pp.1173-1182, 1987.

J. A. Cano-ruiz and G. J. Mcrae, ENVIRONMENTALLY CONSCIOUS CHEMICAL PROCESS DESIGN, Annual Review of Energy and the Environment, vol.23, issue.1, pp.499-536, 1998.
DOI : 10.1146/annurev.energy.23.1.499

G. Chen, P. L. Yue, and A. S. Mujumdar, Sludge Dewatering and Drying. Drying Technology, pp.883-916, 2002.
DOI : 10.1081/drt-120003768

K. M. Christiannsen, Waste Annual topic update, European Environment Agency, p.43, 1998.

C. Couturier, S. Berger, I. Hérault, and I. Meiffren, La digestion anaérobie des boues urbaines: état des lieux, Agence de l'eau Adour-Garonne & Solagro, p.36, 2001.

B. E. Farkas and L. J. Hubbard, Analysis of convective heat transfer during immersion frying. Drying Technology, pp.1269-1285, 2000.

J. Garayo and R. Moreira, Vacuum frying of potato chips, Journal of Food Engineering, vol.55, issue.2, pp.181-191, 2002.
DOI : 10.1016/S0260-8774(02)00062-6

J. Graille, Réactions chimiques induites par la friture. OCL, Oléagineux Corps Gras Lipides, pp.36-40, 1998.

T. S. Gross, Thermal Drying of Sewage Sludge, Water and Environment Journal, vol.7, issue.3, pp.255-261, 1993.
DOI : 10.1111/j.1747-6593.1993.tb00843.x

H. Grueter, M. Matter, K. H. Oehlmann, and M. D. Hicks, Drying of sewage sludge. An important step in waste disposal, Water Science and Technology, vol.22, pp.57-63, 1990.

H. Grüter, M. Matter, K. H. Oehlmann, and M. D. Hicks, Drying of sewage sludge. An important step in waste disposal, Water Science and Technology, vol.22, pp.57-63, 1990.

M. Hasserbrauck and G. Ermel, Two examples of thermal drying of sewage sludge, Water Science and Technology, vol.33, issue.12, pp.235-242, 1996.
DOI : 10.1016/0273-1223(96)00478-7

T. Kudra, Energy aspects in drying. Drying Technology, pp.917-932, 2004.

W. Kuntschar, Verfahren und Vorrichtung zum Trocknen von Klärschlamm: Process and equipment for the sludge drying, pp.19639551-19639552, 1996.

P. Lowe, Developments in the thermal drying of sewage sludge Journal of the chartered institution of water and environmental management, p.306, 1995.

C. Lue-hing, P. Matthews, J. Namer, N. Okuno, and L. Spinosa, Sludge management in highly urbanized areas, Water Science and Technology, vol.34, issue.3-4, pp.517-524, 1996.
DOI : 10.1016/0273-1223(96)00619-1

E. A. Mcgill, The Chemistry of frying. Backer's digest, pp.38-42, 1980.

R. Moreira, M. Castell-perez, and M. Barrufet, Deep-fat frying: Fundamentals and applications, ed. Aspen publication, 1999.

B. Munck-kampmann, Waste Annual topic update, European Environment Agency, p.24, 2000.

C. Peregrina, D. Lecomte, P. Arlabosse, V. Rudolph, C. Peregrina et al., Analysis of heat and mass transfer during fry-drying of sewage sludge. Drying Technology Life cycle assessment (LCA) applied to the design of an innovative drying process for sewage sludge, Process Safety and Environmental Protection, 2005.

C. Peregrina, D. Lecomte, P. Arlabosse, and V. Rudolph, In press-b. Life cycle assessment (LCA) applied to the design of an innovative drying process for sewage sludge, Process Safety and Environmental Protection

M. S. Peters and K. D. Timmerhaus, Plant design and economics for chemical engineers, 1991.

T. G. Poulsen and J. A. Hansen, Strategic environmental assessment of alternative sewage sludge management scenarios, Waste Management & Research, vol.1, issue.3, pp.19-28, 2003.
DOI : 10.1177/0734242X0302100103

R. L. Powell, CFC phase-out: have we met the challenge?, Journal of Fluorine Chemistry, vol.114, issue.2, pp.237-250, 2002.
DOI : 10.1016/S0022-1139(02)00030-1

S. Ressent, Etat de l'art sur le séchage thermique de boues urbaines et industrielles, Agence de l'eau Seine-Normandie, p.358, 1998.

S. Ressent, Campagnes de mesure realisés sur des séchoirs de boues urbaines et industrielles, Agence de l'eau Seine-Normandie, p.268, 1999.

S. B. Riffat, C. F. Afonso, A. C. Oliveira, and D. A. Reay, Natural refrigerants for refrigeration and air-conditioning systems, Applied Thermal Engineering, vol.17, issue.1, pp.33-42, 1997.
DOI : 10.1016/1359-4311(96)00030-0

S. Saguy, G. Ufheil, and S. Livings, Oil uptake in deep-fat frying: review. OCL, Oléagineux Corps Gras Lipides, pp.30-35, 1998.

J. F. Sinnott, An Introduction to Chemical Engineering Design, 1991.

R. F. Stier, Understanding High-Volume Frying. Part 1. Backing & Snack, pp.70-76, 1996.

R. F. Stier, Understanding High-Volume Frying. Part 2. Baking & Snack, pp.51-54, 1996.

R. F. Stier, Understanding High-Volume Frying. Part 3. Backing & Snack, pp.41-44, 1996.

L. S. Tong and Y. S. Tang, Boiling Heat Transfer and Two-Phase Flow, Journal of Applied Mechanics, vol.33, issue.2, 1997.
DOI : 10.1115/1.3625107

R. E. Treybal, Drying, Mass-transfer operations, p.858, 1980.

W. Tsai, R. Turton, R. C. Bailie, W. B. Whiting, and J. A. Shaeiwitz, An overview of environmental hazards and exposure risk of hydrofluorocarbons (HFCs) Chemosphere, Analysis, Synthesis, and Design of Chemical Processes, 1998.

R. Turton, R. C. Bailie, W. B. Whiting, and J. A. Shaeiwitz, Analysis, Synthesis, and Design of Chemical Processes, 2003.

C. H. Twu, J. E. Coon, and D. Bluck, Comparison of the Peng-Robinson and Soave- Redlich-Kwong equations of state using a new zero-pressure-based mixing rule for the prediction of high-pressure and high-temperature phase equilibria. Industrial & Engineering Chemistry Research, pp.1580-1585, 1998.

C. H. Twu, W. D. Sim, and V. Tassone, Getting a handle on advanced cubic equations of state, Chemical Engineering Progress, vol.98, pp.58-65, 2002.

G. D. Urich, A guide to chemical engineering process design and economics, 1984.

W. M. Vatavuk, Updating the CE Plant Cost Index. Chemical Engineering Magazine, pp.62-70, 2002.

J. Vaxelaire, J. M. Bongiovanni, P. Mousques, and J. R. Puiggali, Thermal drying of residual sludge, Water Research, vol.34, issue.17, pp.4318-4323, 2000.
DOI : 10.1016/S0043-1354(00)00193-7

P. A. Vesilind and C. C. Hsu, Limits of sludge dewaterability, Water Science and Technology, vol.36, issue.11, pp.87-91, 1997.
DOI : 10.1016/S0273-1223(97)00673-2

J. Werther and T. Ogada, Sewage sludge combustion. Progress in Energy and Combustion Science, pp.55-116, 1999.

Y. Zhang, M. A. Dube, D. D. Mclean, and M. Kates, Biodiesel production from waste cooking oil: 1. Process design and technological assessment, Bioresource Technology, vol.89, issue.1, pp.1-16, 2003.
DOI : 10.1016/S0960-8524(03)00040-3

Y. Zhang, M. A. Dube, D. D. Mclean, and M. Kates, Biodiesel production from waste cooking oil: 2. Economic assessment and sensitivity analysis, Bioresource Technology, vol.90, issue.3, pp.229-240, 2003.
DOI : 10.1016/S0960-8524(03)00150-0