T. Acharjee, C. Coronella, and V. Vasquez, Effect of thermal pretreatment on equilibrium moisture content of lignocellulosic biomass, Bioresource Technology, vol.102, issue.7, pp.4849-54, 2011.
DOI : 10.1016/j.biortech.2011.01.018

A. Afacan and J. Masliyah, Solids hold-up in rotary drums, Powder Technology, vol.61, issue.2, pp.179-184, 1990.
DOI : 10.1016/0032-5910(90)80153-P

A. Aissa, A. Duchesne, C. Rodrigue, and D. , Longitudinal segregation of polymer powder in a rotating cylinder, Powder Technology, vol.207, issue.1-3, pp.1-3, 2011.
DOI : 10.1016/j.powtec.2010.11.014

M. Atienza-martínez, I. Fonts, J. Ábrego, J. Ceamanos, and G. Gea, Sewage sludge torrefaction in a fluidized bed reactor, Chemical Engineering Journal, vol.222, pp.534-545, 2013.
DOI : 10.1016/j.cej.2013.02.075

B. Batidzirai, A. Mignot, W. Schakel, H. Junginger, and A. Faaij, Biomass torrefaction technology: Techno-economic status and future prospects, Energy, vol.62, pp.196-214, 2013.
DOI : 10.1016/j.energy.2013.09.035

P. Bergman, A. Boersma, J. Kiel, M. Prins, K. Ptasinski et al., Torrefaction for entrained-flow gasification of biomass, p.78, 2004.

P. Bergman, A. Boersma, R. Zwart, and J. Kiel, Torrefaction for biomass cofiring in existing coal-fired power stations, 2005.

A. Boateng and P. Barr, Modelling of particle mixing and segregation in the transverse plane of a rotary kiln, Chemical Engineering Science, vol.51, issue.17, pp.4167-4181, 1996.
DOI : 10.1016/0009-2509(96)00250-3

A. Boateng, Rotary kilns: transport phenomena and transport processes, p.368, 2008.

A. Chatterjee, A. Sathe, and P. Mukhopadhyay, Flow of materials in rotary kilns used for sponge iron manufacture: Part II. Effect of kiln geometry, Metallurgical Transactions B, vol.5, issue.3, pp.383-392, 1983.
DOI : 10.1007/BF02654357

D. Gupta, S. Khakhar, D. Bhatia, and S. , Axial segregation of particles in a horizontal rotating cylinder, Chemical Engineering Science, vol.46, issue.5-6, pp.1513-1517, 1991.
DOI : 10.1016/0009-2509(91)85076-A

N. Descoins, Contribution à l'élaboration d'outils de simulation des fours tournants dédiés à la pyrolyse de déchets: modélisation dynamique du couplage transport de la charge -transferts de chaleur -réactions chimiques, 2003.

N. Descoins, J. Dirion, and T. Howes, Solid transport in a pyrolysis pilot-scale rotary kiln: preliminary results???stationary and dynamic results, Chemical Engineering and Processing: Process Intensification, vol.44, issue.2, pp.315-321, 2005.
DOI : 10.1016/j.cep.2004.02.025

V. Dinesh and P. Sai, A Model for Residence Time Distribution of Solids in a Rotary Kiln, The Canadian Journal of Chemical Engineering, vol.13, issue.1, pp.392-398, 2004.
DOI : 10.1002/cjce.5450820221

Y. Ding, R. Forster, J. Seville, and D. Parker, Granular motion in rotating drums: bed turnover time and slumping???rolling transition, Powder Technology, vol.124, issue.1-2, pp.18-27, 2002.
DOI : 10.1016/S0032-5910(01)00486-7

Y. Gao, B. Glasser, M. Ierapetritou, A. Cuitino, F. Muzzio et al., Measurement of residence time distribution in a rotary calciner, AIChE Journal, vol.37, issue.5, pp.4068-4076, 2013.
DOI : 10.1002/aic.14175

A. Ingram, J. Seville, D. Parker, X. Fan, and R. Forster, Axial and radial dispersion in rolling mode rotating drums, Powder Technology, vol.158, issue.1-3, pp.1-3, 2005.
DOI : 10.1016/j.powtec.2005.04.030

T. Kohav, J. Richardson, and D. Luss, Axial dispersion of solid particles in a continuous rotary kiln, AIChE Journal, vol.41, issue.11, pp.2465-2475, 1995.
DOI : 10.1002/aic.690411112

T. Langrish, S. Papadakis, and C. Baker, Residence time of two-and threecomponent mixtures in cascading rotary dryers. Drying Technology, pp.325-350, 2007.

E. Lebas, F. Hanrot, D. Ablitzer, and J. Houzelot, Experimental study of residence time, particle movement and bed depth profile in rotary kilns, The Canadian Journal of Chemical Engineering, vol.1, issue.2, pp.173-180, 1995.
DOI : 10.1002/cjce.5450730202

O. Levenspiel, Chemical Reaction Engineering -Third Edition, 1999.

S. Li, Y. J. Li, R. Chi, Y. Cen, and K. , Axial transport and residence time of MSW in rotary kilns, Powder Technology, vol.126, issue.3, pp.217-227, 2002.
DOI : 10.1016/S0032-5910(02)00014-1

X. Liu and E. Specht, Mean residence time and hold-up of solids in rotary kilns, Chemical Engineering Science, vol.61, issue.15, pp.5176-5181, 2006.
DOI : 10.1016/j.ces.2006.03.054

D. Medic, M. Darr, A. Shah, B. Potter, and J. Zimmerman, Effects of torrefaction process parameters on biomass feedstock upgrading, Fuel, vol.91, issue.1, pp.147-154, 2012.
DOI : 10.1016/j.fuel.2011.07.019

Y. Mei, R. Liu, Q. Yang, H. Yang, J. Shao et al., Torrefaction of cedarwood in a pilot scale rotary kiln and the influence of industrial flue gas. Bioresource technology, pp.355-360, 2015.

K. Mujumdar and R. Vv, Simulation of Rotary Cement Kilns Using a One-Dimensional Model, Chemical Engineering Research and Design, vol.84, issue.3, pp.165-177, 2006.
DOI : 10.1205/cherd.04193

M. Phanphanich and S. Mani, Impact of torrefaction on the grindability and fuel characteristics of forest biomass, Bioresource Technology, vol.102, issue.2, pp.1246-53, 2011.
DOI : 10.1016/j.biortech.2010.08.028

J. Ratte, E. Fardet, D. Mateos, and J. Héry, Mathematical modelling of a continuous biomass torrefaction reactor: TORSPYD??? column, Biomass and Bioenergy, vol.35, issue.8, pp.3481-3495, 2011.
DOI : 10.1016/j.biombioe.2011.04.045

W. Saeman, Passage of solids through rotary kilns, Chemical Engineering Progress, vol.47, issue.10, pp.508-515, 1951.

P. Sai, G. Surender, A. Damoradan, V. Suresh, Z. Philip et al., Residence time distribution and material flow studies in a rotary kiln. Metallurgical and material, pp.1005-1011, 1990.

C. Shene and S. Bravo, Mathematical modelling of indirect contact rotary dryers. Drying Technology, pp.1567-1583, 1998.

R. Sherritt, J. Chaouki, A. Mehrotra, and L. Behie, Axial dispersion in the three-dimensional mixing of particles in a rotating drum reactor, Chemical Engineering Science, vol.58, issue.2, pp.401-415, 2003.
DOI : 10.1016/S0009-2509(02)00551-1

Y. Song, J. Thibault, and T. Kudra, Dynamic Characteristics of Solids Transportation in Rotary Dryers, Drying Technology, vol.45, issue.5, pp.755-773, 2003.
DOI : 10.1081/DRT-100107491

R. Spurling, J. Davidson, and D. Scott, The Transient Response of Granular Flows in an Inclined Rotating Cylinder, Chemical Engineering Research and Design. 79 (A), pp.51-61, 2001.
DOI : 10.1205/026387601528525

M. Van-der-stelt, H. Gerhauser, J. Kiel, and K. Ptasinski, Biomass upgrading by torrefaction for the production of biofuels: A review, Biomass and Bioenergy, vol.35, issue.9, pp.3748-3762, 2011.
DOI : 10.1016/j.biombioe.2011.06.023

J. Villermaux, Génie de la réaction chimique -conception et fonctionnement des réacteurs, pp.1-448, 1995.

Y. Sun, J. Jiang, S. Zhao, Y. Hu, and Z. Zheng, Review of Torrefaction Reactor Technology, Advanced Materials Research, vol.347, issue.353, pp.347-353, 2011.
DOI : 10.4028/www.scientific.net/AMR.347-353.1149

J. Wes, A. Drinkenburg, and S. Stemerding, Solids mixing and residence time distribution in a horizontal rotary drum reactor, Powder Technology, vol.13, issue.2, pp.177-184, 1976.
DOI : 10.1016/0032-5910(76)85002-4